wear

Hi, I've searched and searched but noone seems to have asked before, only you 'R' owners discussing the sensor accuracy. Anyway, does the 04 Cupra TDi have a brake wear light? Or is it just on the Rs?

Eagle F1s on the front always kept at manufacturer's recommend 33psi (which is what Goodyear suggest aswell), I tried 34psi for a couple of days but didn't get on with it. My fronts have worn slightly more in the centre, central 2 markers are on the 1.6mm limit, outer edges slightly more at...

Hopefully the photo is self evident but what you should be able to see is a large 'scab' on the rear o/s disc. The car has been to the dealers today for identification of a rumbling noise which at first I had thought to be wheel bearings. I should have noticed this before but anyway the dealer...

I am just about to put F1's on the front to match the backs and I noticed how bad the inner edge has worn when I was doing an oil change. There's about 2mm on the outside edge, so at a glance they look ok. But the inside has worn that low, that there is no tread and you can now see the blue...

I have had my Cupra for nearly 3 years now and all 3 set of tyres i have had have worn a lot more on the inside than the outside. Just wondering if anybody else has found this?

My power steering seems to be misfunctioning recently, and I think it needs a new steering pump. I've got warranty on the car (not manufacturers), but within the first 3 months, any wear and tear claim is not covered. I was just wondering if you guess that this would be classed as W&T...

Hi When decelerating, I tend to put it into 2nd or 3rd (say from 60 + odd) and then hold the revs at about 1200 RPM to get the max engine braking possible. My question is, will this wear my clutch out, ie, is it as bad at putting ur foot down on accelerating at very low revvs? I ask...

Hi All Took my wheels off yesterday to clean the alloys. Front tyres due change as they are down to the marks. 19K not bad for a front set of Bridgstones. Anyway the front nearside tyre is bald on the inside edge all the others are fine. Tracking I thought!! My son...

Iam thinking of rotating the tyres (front to back) periodically on my petrol FR to both make it longer to replacing them and because eventually i would like to replace the pirellis with a tyre that has the alloy protecting rim protector on them would anyone know the best mileage to move them...

just getting some new brake pads does my car have wear indicators im pretty sure they do just need to double check

Hey all quick question, as i have searched here and t'interweb and not found the answer.... I have GSD3 tyres with which one of them is almost at the tread wear indicator level. But what IS that level? 3mm? 2mm? legal limit (1.6mm) ??? Cheers

My TDI DSG is having it's 40k service and they've called to say that the rear discs and pads have gone and that the fronts are not far off! Is it normal for them to go after 40k and for the rear ones to go first?

hello everyone! have a problem with uneven pad wear with wilwood calipers! basicly all the pads have plenty of meat left on them bar one (n/s outer pad) that turned to metal on metal at 100+mph while racing a tom mac evo6 and a evo9, there were pleanty of sparks and my mate tought he was goin to...

Took the wheels off my car this weekend to give them a good old clean, and as I did I noticed that the inside 1"-1.5" is wearing quite badly on the fronts, the rest of the tyre is fine though. Bit worried as to why they are wearing where they are, I would have thought that the tyres should wear...

Sorry to post on a TDI but its bout my FR PD130 that im stumped on, the brakes forum doesnt seem to be very busy (posted something there awhile ago and didnt get much response) I bought off eurocarparts.com replacement discs and pads for it. ATE all round (cant afford anything more than...

I drive an R and I seem to be experiencing excessive tyre wear on the inside edge. Has anyone else experienced this problem because, as you all know, rubber ain't cheap!! Cheers ;)

hi, I was wondering if anybody else is having the same problems as me. I have just picked up a 97 ibiza 8v. gti The main problems i'm having...... Uneven brake wear, the inside of each pad is hardly worn yet the outside pads are cracked and worn badly. The cylinders have been checked...

Hi all you experienced rev heads.HELP.Took car in for 1st MOT a couple of weeks early.Got a nasty shock when it failed on front tyres.:lol: Never seen 1 wear like this.Inside edge taken right down to canvas in like an L shaped groove,deep too.Other front tyre on drivers side worn on inside edge...

A few of us on uk-mkivs have been having some serious bills due to camshaft lobe wear on 130/150 PD TDIs. First sign is tappet noise and then a missfire as the lobes that control the injectors wear through. Just thought I'd post a link to my thread so you can all brace yourselves for the...

hello, has anyone got any advice on the following, the rear offside tyre on my 1999 alhambra tdi 90 hp is wearing rather oddly, its taken far more tread off on the inside than out, its recently had a new wheel bearing in the hub but there is still a noise, is there anything that can work loose...