wrap

This is my purple seat leon cupra 290. I got it on the 30th August this year. Instagram: purplecupra

I've seen the gold heat wrap that some people use to wrap their intake pipework and was wondering if it insulates aswell as reflects radiative heat. I'd have thought the majority of the heat comes from convective heat transfer from the hot air under the bonnet rather than radiative heat...

Need your help in desiding do i go for the Gloss Black? Matt Black? Matt carbon? or Gloss Carbon?? Also having the front splitter done just under the grill. What you think? http://www.carbonskin.co.uk/index.html Amazing cars i went to day and they had just finished wrapping a Bentley...

Guys, considering now that the car is plenty powerful enough for now it just doesnt look as sepcial as I want it to. So was thinking a white vinyl wrap and some Modern Lines? Just wondered what your opinions would be? This is how it stands now (need to get a new splitter again...

Ive got some 3M Di-Noc Carbon Fibre Wrap on order and will be wrapping some interior parts. As for what i dont know, im thinking the radio surround, inside door handles. I would like to do more, if anyone has any ideas please let me know. Also if anyone has removed parts inside the car please...

Well, the vinyl arrived today from a german company, thought i'd start with the bumper trims but decided against that and started with some smaller pieces, so, I've now donw the two wing mirror casings and all interior handles. I'm going to wrap the stereo facia and the climate control unit...

was wondering if there would be any gains from me doing this? thinking of doing downpipe an decat with fiberglass heat wrap. should i do it or leave the downpipe an decat be? thanks for any input :)

I will get my new BlueFlame TBE system fitted very soon. I therefore bought black DEI wrap 5cmx15Meters(way to long, but that what I could get). But now I have second thoughts about wrapping it! Mostly due to craking, I know this shouldnt happen, but I guess its more likely to happen...

I've noticed my FMIC pipes in the engine bay get very hot and I was thinking in maybe wrapping them with exhaust wrap? Would this be a waste of time seeing as it passes through the cooler or do you reckon its worthwhile?

Ok we all know how soft the paint on the Mk1 Leon seems to be and everyone on the forum has surely cleaned their beloved and despaired at the stone chips on the front end. We would all love to get a respray, but then the same would happen again surely. Browsing the net I have now seen quite a...

Very proud owner of a lovely carbon wrap on the roof of my K1. I am however a little concerned over maintaining its looks. Can anybody recommend a cleaning regime/products or is it best to leave alone and just wash off with soapy water once a week Here,s a couple of pics

anyone have a clue how the hell the silver wrap around the turbo goes back on, had mine taken off when new turbo fitted and im sure its on wrong but to be fair its a proper state, been on phone to forge and ordered new turbo intake pipe cus looks like mine has collapsed and getting a little bit...

Had roof done today black vinyl wrapped, to be honest not too impressed with it.. looks good and i like the style but the finish isnt that good and i dont think its come out good so im going to take it back and see what can be done it just doesnt seem right, alot of marks on it, bubbles and...

OK, busy few days but still managed to get some time lapse of us wrapping the Leon and a few finished pics! YouTube - Leon Car Wrap You may notice with interest the M+M mirrors have gone!! Also please feel for me I have spend hours stripping the door cards / wing...

looking at a turbo back system, when i had a FRS it was the dun thing to heat wrap from the turbo down, and it did help reduce engine temps, as the turbo was at the top front of the engine bay. is it worth it on the LCR systems,

ok just wondering if anyone has done this? i was thinking of doing this to mine as the charge pipe strate over the engine and thought this may help reduce intake temps

My Exhaust heat shield on my beeza Is really loose and it knackerd that much so that it is rattling so much it driving me mad!!! Can i just remove it? I have a 3'' Downpipe With de-cat and Milltek System...And at the Moment When driving it really hard am getting Small 1ft flames out of the...

Im having problems with my exhaust, where it loops over the rear beam it rattles off teh rear beam. I was wondering if i wrap it in heat wrap would it stop the rattling? IVe tried a few things but they just melt away, at least this wont melt :) Any ideas? Ta