Separate names with a comma.
Discussion in 'Badger5' started by ibizacupra, Mar 21, 2005.
are you able to get 330x28 for mine ? doesn't have to AP
330x28 2-piece yea.
can you confirm rotor pcd
not sure Bill ;/ where can I check ?
can you measure the diameter of the fixing holes across the bell..
12 bolt fixing and PCD for rotor bolts of 203.2mm is what use - which is an AP pattern.
Hi Bill. I'm in the process of saving for a set of these brakes for my 1M LCR. When the rotors needs replacing do you replace the alloy bell at the same time? Has the price changed at all?
Also how much for a set of braided hoses and what would you recomend for rear discs and pads? It'll be fast road use may be a little track action if I can grow a pair.
prices not changed yet.... likely to tho on next batch that get made.. 1 x pair of bells left currently.
rotors and rotor bolt get replaced when rotors worn out.. bells you keep
pads I would stick with good quality oe spec.. perhaps grooved rear disks.. to keep pads "brushed"
Just did a bit of adding up does £729 inc pads, VAT and P&P sound about right?
330x28 2-piece Upgrades:
Rotors - £149 each
Ally Bells - £75 each *
bolt kit - £13.95/disk set
caliper spacer brackets - £8 each
* black anodised now
£491.90 disks etc as above
£109 for DS2500
£129 for DS3000
Delivery £9.70, unless ordered before end of feb in which case its free
Thanks Bill, brakes arrived yesterday.
cool.. bed em in.. very important
ease a heat cycle into them progressively... and gently..
I'm envious! I'm just trying to talk my self into buying a set as I'll be replacing my brakes end of June.
Bill is this the last pair of the last batch? If so what will the new price be on the next batch?
price *should* be pretty much the same.. maybe some 3-5% creep on material prices
Would you sell the caliper spacing brackets seperate?
I take it this just moves the caliper out that but so you can fit the bigger disc?
If so how much inc vat and post. Only reason I ask is I have a friend at ap so get mates rates on the rotors and bells.
yea, spacers available seperately and in stock no problem
how much are they im getting confuesd with the pricing in the thread lol,
also whens the full silicone tip out? would there be a big enough difference between one and a normal forge tip? lcr btw
caliper spacer brackets - £8 each +vat & delivery
V3 TIP in a couple of weeks now - night and day performance difference between 80mm bore and normal size... The gains we see are over and above a conventional silicon tip, not just std tip
will give you a call today mate
got them and fitted,
once fitted should i have the same sort of pedal travel?
pedal travel should be unchanged.. nothing has changed hydraulicly