Dismiss Notice
Hi Guest, stickers are available from our online store.

2 Piece AP 325 or 330 5x100 Disks

Discussion in 'Badger5' started by ibizacupra, Mar 21, 2005.

Tags:
?

which size 2-piece disk for Leon Cupra-R?

Poll closed Mar 26, 2005.
  1. 325mm x 28mm

    0 vote(s)
    0.0%
  2. 330mm x 28mm

    5 vote(s)
    100.0%
  1. Dani_b19

    Dani_b19 Active Member

    Joined:
    Apr 8, 2009
    Messages:
    301
    Likes Received:
    0
  2. ibizacupra

    ibizacupra Jack-RIP my little Friend
    Forum Sponsor

    Joined:
    Jul 25, 2001
    Messages:
    31,329
    Likes Received:
    15
  3. Dani_b19

    Dani_b19 Active Member

    Joined:
    Apr 8, 2009
    Messages:
    301
    Likes Received:
    0
    Any idea who the disc is by bill?
     
  4. ibizacupra

    ibizacupra Jack-RIP my little Friend
    Forum Sponsor

    Joined:
    Jul 25, 2001
    Messages:
    31,329
    Likes Received:
    15
    sorry no..
    10 bolt ones I have seen from ecs, who dont supply replacement disk only, and wilwood
     
  5. 8bit

    8bit Active Member

    Joined:
    Feb 11, 2010
    Messages:
    3,401
    Likes Received:
    3
    Bill, do you still do the bells to fit AP 12-bolt rotors? A friend of mine is selling a set of rotors but the bells on them are to fit AP calipers, not LCR Brembos.

    Also, the rotors came into contact with some brake fluid. The damage looks only superficial to me, would you think they'd be OK with some light skimming?
     
  6. ibizacupra

    ibizacupra Jack-RIP my little Friend
    Forum Sponsor

    Joined:
    Jul 25, 2001
    Messages:
    31,329
    Likes Received:
    15
    yes and yes

    one pair in stock. clear anodised
     
  7. 8bit

    8bit Active Member

    Joined:
    Feb 11, 2010
    Messages:
    3,401
    Likes Received:
    3
    OK thanks, I'll see if we can get the rotors cleaned up and give you a shout once we're sure they're OK.

    I'd also need some caliper spacers, I take it these go between the caliper and the carrier? Do these come with longer bolts or are fresh OEM ones OK?
     
  8. ibizacupra

    ibizacupra Jack-RIP my little Friend
    Forum Sponsor

    Joined:
    Jul 25, 2001
    Messages:
    31,329
    Likes Received:
    15
    spacers only 3.5mm, std bolts long enough
     
  9. adam cupra 20vt

    adam cupra 20vt Built Not Bought.

    Joined:
    Mar 31, 2005
    Messages:
    6,162
    Likes Received:
    2
    Hi Bill are these still avalable? Looking to upgrade my LCR brakes in the not to distant future.

    Is the 330 the max disc size you do?

    How much are 2 rotors, bells, bolts and the spacers? I already have a new set of pads sitting here.
     
  10. ibizacupra

    ibizacupra Jack-RIP my little Friend
    Forum Sponsor

    Joined:
    Jul 25, 2001
    Messages:
    31,329
    Likes Received:
    15
    330's are the largest disk advised for those 4 pots


    330x28 2-piece Upgrades:
    Rotors - £185 each
    Ally Bells - £75 each *
    bolt kit - £13.95/disk set
    caliper spacer brackets - £8 each

    prices exclude vat
     
  11. adam cupra 20vt

    adam cupra 20vt Built Not Bought.

    Joined:
    Mar 31, 2005
    Messages:
    6,162
    Likes Received:
    2
    Although 330 is the maximum advised disc size do you think 343x28 would cause a problem?

    If I was to to get the bells off you and the rotors myself I could use a 10mm spacer instead of a 3.5? Is the spacer just a flat plate type with 2 holes?

    I'm thinking it wouldn't be that bad, prob give me about 10-12mm of unswept inner disc area.
     
  12. ibizacupra

    ibizacupra Jack-RIP my little Friend
    Forum Sponsor

    Joined:
    Jul 25, 2001
    Messages:
    31,329
    Likes Received:
    15
    possible yes. and yes spacer between caliper and bracket making sure bolts long enough

    8" PCD on these larger rotors?
    where from?
     
    #252 ibizacupra, Mar 4, 2014
    Last edited: Mar 4, 2014
  13. adam cupra 20vt

    adam cupra 20vt Built Not Bought.

    Joined:
    Mar 31, 2005
    Messages:
    6,162
    Likes Received:
    2
    I was speaking to Martin at reyland about making me some rotors but he said the same as you .. Would need the next size up bells for those but could do 335x28's to fit. If I was to go down the 343 route with bigger bells could you tell me what offset they need to be please?
     
    #253 adam cupra 20vt, Mar 4, 2014
    Last edited: Mar 4, 2014
  14. ibizacupra

    ibizacupra Jack-RIP my little Friend
    Forum Sponsor

    Joined:
    Jul 25, 2001
    Messages:
    31,329
    Likes Received:
    15
    offset is bells not rotor and I dont have a figure to give you
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice