Aftermarket H/U ISO harness

R3bb

Active Member
Oct 28, 2007
69
0
Does anyone know which harness will fit an Arosa - ISO?
Part number or which Seats are the same?
They seem to list all other Seats but Arosa!:doh:

Also, my standard Seat cassette headunit isn't ignition fed.:rolleyes:
Is there a feed in the harness that isn't connected or do you need to run one in?
 

RadCordy

Active Member
Aug 2, 2002
342
6
Visit site
hi, you dont need a harness, its ISO ready. All you need to do is swap the red and yellow wires over so your new unit is ignition switched. The power wires (yellow and red) normally have plugs half way down them so you can swap them over easy.

Thats all i did anyway :)
 

helms

Console Race Car Driver
Jan 30, 2005
492
0
Basingstoke
ISO is an industry standard i believe. so aslong as your Arosa has an iso on it, then your fine.. As said maybe switch red to yellow and visa versa. then your sorted.
 

R3bb

Active Member
Oct 28, 2007
69
0
Yep, as it turned out, it didn't need an adapter (apart from the ariel), and the standard h/u comes out easily, BUT has no ignition feed, the cable is looped in the back of the plug so it only has a permanent feed.