Dismiss Notice
Hi Guest, stickers are now available from our online store. We've also updated our terms and conditions so check them out too.

Another TRC splitter thread....sorry

Discussion in 'Leon Mk3' started by Jhunter_83, Jun 17, 2018.

  1. Jhunter_83

    Jhunter_83 Full Member

    Joined:
    Jun 25, 2011
    Messages:
    202
    Likes Received:
    5
    Hello all, will the TRC for a 17 plate Leon FR ST ok? Just about to press purchase a need to double check

    [​IMG]
     
  2. Damo H

    Damo H That Carbon snob down the street...

    Joined:
    Oct 3, 2012
    Messages:
    1,345
    Likes Received:
    528
    TRC themselves say that it will fit but it’s not perfect as was molded for the pre-facelift bumper.
     
    Jhunter_83 likes this.
  3. Jhunter_83

    Jhunter_83 Full Member

    Joined:
    Jun 25, 2011
    Messages:
    202
    Likes Received:
    5
    Cheers, not sure whether to now then
     
  4. Damo H

    Damo H That Carbon snob down the street...

    Joined:
    Oct 3, 2012
    Messages:
    1,345
    Likes Received:
    528
    The TRC splitter is very good quality, but I’d look for one that you know is a 100% fit. Or contact TRC and see if they’ll take a moulding to make one for the facelift
     
  5. j.owen

    j.owen Full Member

    Joined:
    Aug 30, 2015
    Messages:
    415
    Likes Received:
    2
    If you don’t live too far away or don’t mind the drive then go down to their HQ and speak to them and see what they can do. I have seen a few facelift Leon’s with TRC splitters and they didn’t look out of place in any way at a glance...
     
  6. Jhunter_83

    Jhunter_83 Full Member

    Joined:
    Jun 25, 2011
    Messages:
    202
    Likes Received:
    5
    I’m up in Newcastle so will probably be a 7 hour round trip I would have thought.
     

Share This Page