Dismiss Notice
Hi Guest. If you're not subscribing to us on YouTube yet, you're missing out on car news and reviews. Subscribe to our channel to get notified when we post new videos.

anybody with revo got over 200lb/ft?

Discussion in 'Ibiza Mk3 (2000-2002)' started by flashbsd, Mar 3, 2006.

  1. flashbsd

    flashbsd Guest

    mine is coming out at around 190max, with stage 1.:(

    has anybody else got any proved revo results with over 200pounds?

    with simple mods.
     
  2. m0rk

    m0rk sarcasm comes free
    Site Owner

    Joined:
    May 19, 2001
    Messages:
    27,832
    Likes Received:
    24
    bog stock Ibiza Cupra - Revo stage 1

    197bhp (dirty dirty air filter) 266lbft

    Got the dyno plot somewhere - but basically peaked at 5500rpm & held to past 6500 with minimal drop

    right boost, right timing (ie - not loads of both)
     
  3. ibizacupra

    ibizacupra Jack-RIP my little Friend

    Joined:
    Jul 25, 2001
    Messages:
    31,328
    Likes Received:
    14
    how measured?
     
  4. flashbsd

    flashbsd Guest

    vag-com nm conversion, ok if its not that accurate, why did a mates have 290nm and i only reach 250 max using the same measuring device, on the same day and the same road.

    Difference is, Jabba and Revo Stage 2 (which i am getting removed shortly)
     
  5. speedsix

    speedsix Leon Cupra R 225

    Joined:
    Oct 30, 2004
    Messages:
    825
    Likes Received:
    0
    That reading isn't valid on a chipped car is it?
     
  6. ibizacupra

    ibizacupra Jack-RIP my little Friend

    Joined:
    Jul 25, 2001
    Messages:
    31,328
    Likes Received:
    14
    vag-com or RR?
    same on both of yours yea?

    torque (load) request on logging assumes all sensors are working correctly.. (eg MAF)
     
  7. Martyn

    Martyn SCN Admin

    Joined:
    Jun 12, 2001
    Messages:
    1,624
    Likes Received:
    0
    I think he's using vag-com Bill. T

    The difference in results is probably down to the different values on the ECU which were changed by the tuner.
     
  8. flashbsd

    flashbsd Guest

    vag-com, getting it RR'd shortly.

    Juts looked back at some logs a long time ago, ive never seen over 189lb/ft torque with revo on vag-com
     
  9. Martyn

    Martyn SCN Admin

    Joined:
    Jun 12, 2001
    Messages:
    1,624
    Likes Received:
    0
    What's the point of looking at a log which contains inaccurate data (torque) though?
     
  10. Glenn

    Glenn Full Member

    Joined:
    Oct 15, 2001
    Messages:
    513
    Likes Received:
    0
    Try logging MAF x 1.323 then taking the result x 5252 / RPM.

    Block 120 is useless once chipped/remapped.
     
  11. flashbsd

    flashbsd Guest

    had stage 2 removed today, pulls much better, must have been the older code like some leon people have had with stage 2.
     
  12. CupraPower

    CupraPower Full Member

    Joined:
    Jan 29, 2004
    Messages:
    613
    Likes Received:
    0
    Mine came in 195bhp and 240lbs/ft
    Was very happy!! thats why i need 2 new front tyres!! :p
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice