Boost gauge Fitting

[Claki]

Hi guys, im looking at the fitting kit that demon tweeks sell but i have no idea what fittment i need. Can anyone advise?

For the record i have a nomad boost gauge

 

[Claki]

Or maybe im just being thick?

 

[ReDBull]

Have a look in the FAQ section there's a guild in there.

 

[Claki]

I was just wondering because its a gauge specific thing.

 

[dannyCworth]

you want a 52mm gauge accompanied by 3mm or 4mm silicone piping and about 1.5metre wiring to extend from the back of the gauge to the electric block.

52mm is typically the norm, so most gauges and pods will come in this size.

 

[Claki]

I need advice about the fitting kit on demon tweeks. One of the many options like 1/8 taper or flat fitment i dont understand.

 

[Roach]

post a link of this fitting kit you speak of.

As said above you just need some silicone hose and a pod to stick the gauge in.......... And obviously a gauge..

 

[Claki]

Sorry i should have posted the link straight up.


http://www.demon-tweeks.co.uk/performance/fittings-accessories/lma-turbo-boost-gauge-fitting-kit

 

[Claki]

And bearing in mind im fitting it to a diesel so i have to tap it into a boost hose.

 

[dannyCworth]

Overkill mate - Order the following;

Silicone Vac Hose
4mm Diamter
1m Length
Colour of your choice
£2.34
http://www.ebay.co.uk/itm/1-m-Silic...aterials_Plumbing_MJ&var=&hash=item4cfd90ca6e

Barbed T-Piece
4mm Diameter
£1.95
http://www.ebay.co.uk/itm/Plastic-B..._Hearing_Cooling_Air&var=&hash=item3f1100adb3

You will probably need addition electric wiring, as typically the length you get with the gauge is not long enough to reach the electric block behind the dimmer switch

 

[LEE69]

Overkill mate - Order the following;

Silicone Vac Hose
4mm Diamter
1m Length
Colour of your choice
£2.34
http://www.ebay.co.uk/itm/1-m-Silic...aterials_Plumbing_MJ&var=&hash=item4cfd90ca6e

Barbed T-Piece
4mm Diameter
£1.95
http://www.ebay.co.uk/itm/Plastic-B..._Hearing_Cooling_Air&var=&hash=item3f1100adb3

You will probably need addition electric wiring, as typically the length you get with the gauge is not long enough to reach the electric block behind the dimmer switch

He needs a fitting to fit into a hard pipe it's a diesel, so it's a different fitting.

 

[dannyCworth]

He needs a fitting to fit into a hard pipe it's a diesel, so it's a different fitting.

ahhh my bad, definitely didn't read the diesel part!

 

[Claki]

Yeah this is what i need help with. what fitting to use and what size, thread ect.

 

[LEE69]

That demon tweeks looks a good buy never had one so......

 

[LEE69]

You might want to buy 3mm silicone though far more flexible that the hose supplied i'd have thought, if anything be like aquarium hose

 

[ReDBull]

Doesn't seem a badly priced kit. Like Lee says use silicone hose instead of the nylon. Where's all the Diesel boys when you need them.

 

[LEE69]

Where's all the Diesel boys when you need them.

Playing catch up...just like on the road lmao

 

[ReDBull]

Playing catch up...just like on the road lmao

and covered in soot

 

[LEE69]

 

[Claki]

Ok i have no idea what fitting to tap into the boost lines. Anyone?