Dismiss Notice
Hi Guest. If you're not subscribing to us on YouTube yet, you're missing out on car news and reviews. Subscribe to our channel to get notified when we post new videos.

Brembo Rebuild

Discussion in 'Leon Mk1 (2000-2006)' started by Johny, Feb 22, 2020.

  1. Johny

    Johny Active Member

    Joined:
    Feb 22, 2020
    Messages:
    33
    Likes Received:
    5
    Hello everyone, I have a Cupra R with the Brembo's and i took them off to have a go at a full rebuild but I've got two questions.

    1. Whats this bit from? It was on the floor when i disconnected the brake hose from the brake caliper pipe, my guess is its between these two but id rather double check. [​IMG]

    2. Where can i get the Brembo pipe that the brake hose connects to? Part number would be the best help. I've seen the Badger5 braided brake hoses that seem to be one piece including these hard pipes that go to the calipers but if the pipes are cheaper on their own id just get these. Thanks all for any tips.
     
  2. Johny

    Johny Active Member

    Joined:
    Feb 22, 2020
    Messages:
    33
    Likes Received:
    5
  3. Yellow fr

    Yellow fr Active Member

    Joined:
    Sep 6, 2018
    Messages:
    1,004
    Likes Received:
    717
    Not seen that before in the brembo brake set up so can’t help you on that
    As for the hard pipe not sure if bill at badger 5 is the only place you can buy them pipes ready made up


    Sent from my iPhone using Tapatalk
     
    mty12345 likes this.
  4. Thai-wronghorse

    Thai-wronghorse Active Member

    Joined:
    Dec 3, 2015
    Messages:
    1,296
    Likes Received:
    367
    That doesn't look familiar at all.

    Biggred for all your braking components

    Sent from my SM-G960F using Tapatalk
     
    mty12345 likes this.
  5. Johny

    Johny Active Member

    Joined:
    Feb 22, 2020
    Messages:
    33
    Likes Received:
    5
    Thanks for the input guys. It is possible it might not be related to the brakes as I was replacing tbe bumper aswell so who knows.

    I'll just get the Badger5 braided hoses that are 1 piece from the brake pipe into the caliper thread so no need for the caliper pipes. This way i dont have to worry about that part missing anywhere :D
     
  6. Scotty_b

    Scotty_b Leon Cupra 300R

    Joined:
    Jun 3, 2004
    Messages:
    5,883
    Likes Received:
    5
    Hel will make you braided lines that replace the metal pipe and original flexi for about £50.

    They only show upto the metal pipe online but I spoke to them recently and they said just add a note to replace that pipe and they will do it.


    Sent from my iPhone using Tapatalk
     
  7. Johny

    Johny Active Member

    Joined:
    Feb 22, 2020
    Messages:
    33
    Likes Received:
    5
    Thanks mate, will add a note for them when putting the order thru.

    Odesláno z mého SM-N960F pomocí Tapatalk
     
    Scotty_b likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice