Clutch pedal switch? Seat toledo 2005 tdi

[SeatToledo123]

Hello, does the 2005 Seat Toledo 1.9 TDI have a clutch switch? If so does anyone know where is located?

My Toledo revs slight when changing gear, and sometimes revs madly, clutch is not slipping.

 

[Muttley]

Assuming this is a Mk.2 Toledo, the one that they cut the boot off of to make the first Leon, then yes. It's on the clutch pedal bracket.

 

[SeatToledo123]

its mk3 mate

 

[Muttley]

Toledo Mk.3 section is just next door

The answer is yes (as I suspected it might be). It's on the master cylinder, so inside the engine compartment.

http://elsaweb.spaghetticoder.org/doc/S.en-GB.S04BFXQ8S/32746730/3

 

[SeatToledo123]

I ordered the clutch pedal switch from seat, however seat technicians are now saying that this model MK3? does not have a clutch pedal switch

Nothing is showing up in diagnostics, vehicle revs when changing gear and all of a sudden will rev very high.

 

[Muttley]

The elsa page is from the Mk.3 Toledo (5P2) section.

2005 TDI 1.9 seems to restrict the choice to one of two 105 BHP PD engines, BJB or BKC. Both have 0A4 5-speed manual gearboxes.

The pedal position sensor is numbered 19 in this diagram from Elsa. Ask then to find sensor G476.

From the look of it, it is a non-contact sensor, Hall effect or something similar, sensing the position of the piston in the master cylinder.