DARKSIDE DEVELOPMENTS Budget Turbo Kits for 1.9TDi & 2.0TDi (200bhp or 230bhp)

DarksideDev

Forum Sponsor
Oct 18, 2012
44
1


Budgetturbokit.jpg


http://www.darksidedevelopments.co....budget-turbo-kit-inc-fitting-and-mapping.html


We are pleased to let you guys know that we have now put together a budget turbo kit for 1.9 & 2.0TDi engines.


1.9 TDi VE Engine

Seat Leon Mk1 - ALH 90, AHF / ASV 110


1.9 TDi PD Engines

Seat Leon 1M - ATD, AXR 100 / AJM, AUY 115 / ASZ 130 / ARL 150

Seat Leon K1 - BXE / BKC 105 & BXF / BRU 90

Seat Ibiza Mk4 - ATD, AXR 100 / ASZ, BLT 130 / BPX, BUK 160

Seat Cordoba - ATD, AXR 100 / ASZ, BLT 130

Seat Toledo - AXR 100, BXE / BKC 105 & BXF / BRU 90

Seat Altea - BJB / BXE / BKC 105 & BXF / BRU 90


2.0 TDi Engines

Seat Altea - BKD 140

Seat Leon - BKD 140


This Turbo Kit is a drive-in/drive-out service offering a 200bhp or 230bhp conversion for your 1.9 or 2.0 TDi with a Cast Manifold

Included in the service:

GTB1749V Turbo (200bhp maximum) or GTB1756V Turbo (230bhp Maximum)
Custom 2.5" Stainless De-Cat Downpipe
Braided Oil Feed and New Oil Return
4 BAR MAP Sensor
Oil and Filter Swap (Quantum Platinum Oil, Genuine Filter)
Fully Fitted at our Workshop
Custom Re-map - with before and after dyno print out


An upgraded clutch is advised but we have done quite a few of these conversions and 50% of the time the stock clutch holds, even with an aggressive tune! As long as your Clutch and Flywheel are in good condition it should be okay

Your intercooler pipework must be in good condition. Ideally an upgraded pipework kit is recommended. We have different kits listed here - http://www.darksidedevelopments.co.uk/intercoolers-and-pipes/


We can offer discounted rates off the fitting of any clutch, intercooler or exhaust kit done at the same time


The power figures quoted are conservative, not exaggerated like others may quote. The GTB1756V is better in every way than the hybrids offered on the market at the moment. The spool on the GTB1749V will be similar to the standard turbocharger and more than adequate with the larger turbo for town use


The Dyno Printout shows the GTB1756V Kit fitted to a Polo PD130. The spec of a car is here - http://www.darksidedevelopments.co.uk/polo-9n3-1-9-8v-asz/

224bhp%20&%20360Ft%20Lbs.JPG


The 1.9 TDI PD130 & PD150 and the 2.0 16v PD140 Engines will do 230bhp on the Stock Injectors


PD100, PD105 & PD115 engines will require PD150 Injectors to get past 170bhp - http://www.darksidedevelopments.co.uk/products/1-9-8v-tdi-pd150-arl-injector-set-038-130-073-al.html


90 & 110 VE Engines will also require Race Injector Nozzles with this turbo kit - http://www.darksidedevelopments.co.uk/products/hflo-x-race-nozzles-for-1-9-2-5-ve-engines.html



PRICES
GTB1749V Turbo Kit (200bhp maximum) - £1500 ex VAT £1800 inc VAT
GTB1756V Turbo Kit (230bhp Maximum) - £1600 ex VAT £1920 inc VAT



PLEASE NOTE: THIS KIT CAN ONLY BE FITTED IN OUR WORKSHOP, PARTS CANNOT BE SOLD SEPERATELY​
 
Last edited:

eta76

Flying dutchman
Jan 6, 2012
77
0
Looks cool. No budget kits for BMN engines ? 170pk
(And you broke all the links.. not just the text, but the actual link contains 'darksided...')
 

DarksideDev

Forum Sponsor
Oct 18, 2012
44
1
Sorted the link sout, thanks for that.

We have a couple of options for the BMN, drop us an email with your power goals and we can sort it out :)

Cheers

Scott
 
Nimbus hosting - Based solely in the UK.