Dual exit exhaust fitting?

[Uselesshippy]

Hi, I'm looking to change the standard twin exit exhaust to a dual outlet. Anyone got any suggestions or tips for fitting. I'm thinking it will just require the rear valance cutting on the opposite side. It's a standard 08 FR .

 

[lee3011]

Ideally you'd need the Btcc rear bumper



Sent from my iPhone using Tapatalk

 

[Jfox]

Or a Cupra R valance.

The 08FR is the same as the pre-fl cupra.

So the Cupra R valance will be what you need.

Go ask Dave @ Sere motors he will sort you out with a price.

 

[Chris232]

I cut mine, looks spot on


Sent from my iPhone using Tapatalk

 

[Uselesshippy]

I cut mine, looks spot on


Sent from my iPhone using Tapatalk

Hi Chris do you have a picture and was there any issues with the inner support..thanks

Sent from my SM-G930F using Tapatalk

 

[Chris232]

Will get one sometime, what u mean inner support, the valance is a double skin type hard plastic that can be removed, cut and put back on again without modifying anything else,


Sent from my iPhone using Tapatalk

 

[Uselesshippy]

Bloody thing won't let me post a pic, it's the inner valance. The section that has the almost tunnel bit over the standard exhaust.

 

[Chris232]

Will get one sometime, what u mean inner support, the valance is a double skin type hard plastic that can be removed, cut and put back on again without modifying anything else,


Sent from my iPhone using Tapatalk

 

[Chris232]

I just left it on and ignored it, it can't be seen when the cars on the ground


Sent from my iPhone using Tapatalk

 

[Uselesshippy]

Not sure if this will work

 

[Uselesshippy]

http://s163.photobucket.com/user/andyccr/media/leon rear/fin2.jpg.html

 

[Chris232]

Well I cut it as well just in a rough oval type shape to the other side , doesn't need much removed


Sent from my iPhone using Tapatalk