ebay 3inch downpipe and decat ? Anyone bought one?

[P1N3R]

What needs cutting off that then?

 

[JayWinter]

on the piece without the flex on if you got a 2.5" exhaust you just cut off at the 1st weld line mate

 

[P1N3R]

Ahhhh, I thought you meant to stop it hitting the bulkhead. Gotcha, thanks

 

[dannyboi321]

thanks for that fella going to order mine up this week

 

[JayWinter]

no worries dude

 

[phil 9289]

Anyone got the sizes and angle of bend etc? Got access to some stainless pip so thinking of making my own one up. Know I could just take the standard pipe off but need the car to still be used daily while making the new one up.

 

[nowalk]

i found this website that has some awsome downpipes at good prices! Used one on my audi tt 1.8t 225 and no modifing or anything just bolted right up! avenueautosport dot com
P.s. they gave me this promo code to use on my next purchase on there site! (seat5)

So pass it on to all fellow brothers on the forum and save! Alot of cool vendors on there website!

 

[cupra-barn]

I have the turbo revs 3" downpipe and decat.

Perfect fitment for me went straight on. I may just be lucky

 

[tom w]

I have the turbo revs 3" downpipe and decat.

Perfect fitment for me went straight on. I may just be lucky

Is that on s Leon? As this is what they are really designed for

 

[cupra-barn]

Is that on s Leon? As this is what they are really designed for

Ah yes sorry didn't realise you were in a beeza

 

[cuprawill]

ive got one of the turbo revs ones, ive got a miltek catback so 2.5" bore, if i was to cut the 2" reducer of the decat wouldnt it be too short to reach the catback system then?

 

[chris_200120vt]

well think to be honest would have a custom made one , ive just been quoted £200 for a 3" downpipe and sports cat fitted so for the sake of £90 not worth the hassle

 

[dannyboi321]

iv done a bit of searching about and am now getting a custom 3inch downpipe and decat for £180

 

[neville_bartoz]

I have the turbo revs 3" downpipe and decat.

Perfect fitment for me went straight on. I may just be lucky

also fitted one. had to knock in the bulkhead a little bit but apart from that it was definately worth the money saved. but then i did have a two poster ramp to stand under when i did this.

 

[adulka]

hi,
a little revive topic
i want buy downpipe + decat pipe from TurboRevs, but i dont know, if i it fitted without probleme

is here someone, who still buy Dowpnpipe + decat pipe from TurboRevs and fitted it on beeza?

Adam

 

[Neil82]

iv just bought a spacer for the time being nut will be having it mapped out eventually, thanks for the advise think i may get 1 if i only need slight modifications to fit

About to order this decat, what do you guys mean by a spacer? What's it for?

 

[chris_200120vt]

About to order this decat, what do you guys mean by a spacer? What's it for?

the spacer is to move the lamba out so the eml does not come on


i have just made mine using a ebay 3" downpipe extended it 40mm on the downpipe so no rubing on the bulkhead , and v-banded a 200 cell cat to it so can now run cat or decat all for a price of £220

 

[adulka]

chris have u photo how u extended it?

 

[chris_200120vt]

chris have u photo how u extended it?

at the min no still on tig welding it up , bascially 2 inch down from the turbo end cut it and extended it 40mm then welded the rest of the downpipe back on to it

 

[Berg]

Im doing the same thing but im using my 3" blueflame dp, having the 200 cell cat removed and flanges welded on, so i can have a removable cat/decat without having to take dp off

Is there enough space in the exhaust tunnel for vbands?