Fault codes?

exmgman

Active Member
Nov 30, 2009
76
8
this weekend I had the engine warning light come on fortunately at my destination.
Car is 1.8 FR delivered April 2018 now 15k miles on the clock.
Called Seat Assist as it is still in the 2 year recovery period.
In fact a very helpful AA guy turned up and plugged in his computer.
He showed me the readout.
Status: P006800 - Load measurement. Error message: Deviation excessive. sporadic fault.
15100 - unknown fault. Error message
26372 - unknown fault. Error message
He said that the Load measurement fault was probably the air mass sensor which he took out and cleaned.
He tried to call VW/Audi tech people to find out what the other codes were but typically they didn’t answer.
He reset the codes. Started the car and the light now went out.
So what do these other codes mean? Anything important?
I took a picture of them so that if I need to go to the Stealer I can show them.
Any ideas?
 

RUM4MO

Active Member
Jun 4, 2008
7,813
989
South Scotland
I would have expected the AA to have diagnostic software that decodes all possible faults - especially all possible SEAT faults as clearly they are signed up to act as suppliers of Seat Assist.
 
  • Like
Reactions: cupra14

RUM4MO

Active Member
Jun 4, 2008
7,813
989
South Scotland
A Google search reveals that the first one is a MAP/MAF to Throttle pedal pot disagreement, the second one relates to inlet air leak, so maybe the AA man did get told what to check after all?
 
SEATCUPRA.NET Forum merchandise