FinerDetails - New Detailing Centre

FinerDetails

Official SCN Supporter
As a head towards the end of my third year, Winter being my time for work and expansion I've decided its time to put FinerDetails into its own work environment. Its a brand new unit, but my plans are in place, and work has already started. Hope to see some subscribers!!! ;)

14245_196685308072_664688072_2970618_4580038_n.jpg


Work has already started with aim to be have an official launch Jan 2010!

out with the saw, and 6m by 3m later:

14245_196688768072_664688072_2970636_3389187_n.jpg


next job, break it up:

14245_198666158072_664688072_2987914_5341189_n.jpg


14245_198666163072_664688072_2987915_4133042_n.jpg


now drag it out:

14245_198666168072_664688072_2987916_8312003_n.jpg


then dig out the drain, attach my fitments, and make good ready for new concrete:

14245_198666173072_664688072_2987917_4146151_n.jpg


4.12.09

Spent last night in the unit filling the wash bay:

14245_201620858072_664688072_3011127_5027263_n.jpg


14245_201620868072_664688072_3011128_3353657_n.jpg


You cant really see from the pics, but the fall should ensure all water falls into the drain quite easily. Certainly will only require a quick rinse afterwards to clean up :D
 

FinerDetails

Official SCN Supporter
17.12.09:

Time for some updates on progress. The landlord has been doing his work and also some little jobs for me, and I've got some stuff done too.

wash bay retaining wall now in, and wash bay wall painted and sealed with various stuff prior to next stage of work:

14245_217497408072_664688072_3096357_6516797_n.jpg


I spent most of Tuesday up at the unit, spending 7 hours brush painting, and then the devine pleasure of just filling in the gaps with a spray gun:

14245_217497428072_664688072_3096360_476271_n.jpg


some befores:

14245_217497418072_664688072_3096358_1899765_n.jpg


(new block work had already had one coat when wash bay wall was primed as I knew it would need a couple)

14245_217497423072_664688072_3096359_191029_n.jpg


and after 9 hours painting:

14245_217497433072_664688072_3096361_4217965_n.jpg


14245_217497443072_664688072_3096362_6234364_n.jpg


more work will be being completed Friday and Sauturday, so more pics later this week :)
 

FinerDetails

Official SCN Supporter
18.12.09

I good day today, got the jobs done I wanted too, and some extra too ;) Today the bathroom/toilet has been cleaned and painted, the wash bay retaining wall has has its coat of bit. paint, and the floor has had its first clean with the floor cleaner/scrubber I've hire for the weekend. The extrance door was stained too the other day.

14245_219579843072_664688072_3103368_6283522_n.jpg


14245_219579868072_664688072_3103369_1572012_n.jpg


14245_219579908072_664688072_3103370_4227279_n.jpg
 

FinerDetails

Official SCN Supporter
23rd Dec:

Some more work been done yesterday, the weather really not helping progress, with me digging out in the morning, then the snow can down all morning so I had to take the van back home at noon to make sure it got home:

This is pic as I turn off ther main A-road

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs220.snc3/22753_226246243072_664688072_3131697_7230167_n.jpg[img]

so what been done?
- little wall painted with grey sealing paint
- wash bay floor seal fitted
- wash bay had first coat of bitumen paint
- all unit electrics in - massive thanks to the sparkies for their efforts yest! Even my tube heater in the toilet ;)

[img]http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs240.snc3/22753_226246248072_664688072_3131698_6852344_n.jpg

22753_226246263072_664688072_3131699_1373939_n.jpg


22753_226246268072_664688072_3131700_4241874_n.jpg


today I'm there doing part one office install.
 

FinerDetails

Official SCN Supporter
27.12.09

Its been a very busy few days, lots of work to create and and change some four by two and MDF shets into this skin:

18153_232419998072_664688072_3165731_64747_n.jpg


18153_232420958072_664688072_3165737_1109433_n.jpg


The sparky then returned today, connected and installed all electrics in the office, and the links around the unit dependant on the office, so I then set too, filled the insulation, and clad the outside with MDF:

18153_232420968072_664688072_3165738_3511061_n.jpg


18153_232420983072_664688072_3165739_8169713_n.jpg


another step closer, hopefully lots more going on next week and a huge push towards the end of Dec deadline for everything to be complete for the New Year!!!!!
 
SEATCUPRA.NET Forum merchandise