1. Hi Guest. We've recently updated our forum rules. Please take some time to review them. You can read the new rules here
    Dismiss Notice
Dismiss Notice
Hi Guest, stickers are available from our online store.

Flasher/indicator relay

Discussion in 'Mk5 Ibiza FAQ's (6J) 2008-2017' started by Ryan Schofield, Jun 10, 2018.

  1. Ryan Schofield

    Ryan Schofield Active Member

    Joined:
    Jun 10, 2018
    Messages:
    5
    Likes Received:
    0
    Hello, I have a 2010 Ibiza Cupra and I have decided to fit some LED indicator lamps. This has made the inside indicator signals flash like crazy but the outside ones are working fine. I think I can just change the indicator relay for an LED friendly one and this should solve the problem without having to wire in individual resistors at each lamp. Does anyone know where I can locate the indicator relay?

    Thanks
     
  2. PraiseTheSun

    PraiseTheSun Active Member

    Joined:
    Apr 5, 2017
    Messages:
    47
    Likes Received:
    2
    I've been looking online for an answer to this for months mate, please update us if you find it!
     
  3. RUM4MO

    RUM4MO Active Member

    Joined:
    Jun 4, 2008
    Messages:
    5,177
    Likes Received:
    165
    I think that you will find that this function is taken care of by the BCM and not by a small cheaper part like a flasher unit, so unless the BCM can be recoded to accept LED bulbs, then you will need to find CAN BUS compliant LED flasher bulbs.
     

Share This Page