1. Hi Guest. We've recently updated our forum rules. Please take some time to review them. You can read the new rules here
    Dismiss Notice
Dismiss Notice
Hi Guest, stickers are available from our online store.

Fog light / reverse light wiring loom

Discussion in 'Exeo & Exeo ST' started by Dark Andrew, Jul 1, 2019.

  1. Dark Andrew

    Dark Andrew Active Member

    Joined:
    Jan 25, 2011
    Messages:
    324
    Likes Received:
    0
    I have an intermittent fault displayed on the dash telling me that the reverse lights / rear fog lots have a fault but only when the boot is open. My assumption is that one or more of the wires in the wiring loom has broken where it flexes as goes from the main car body into the boot lid. Is this an easy one to fix? I am keen to fix it quite promptly as my assumption is that the boot lock power cable also goes through this same conduit and could fail at any time (knowing my luck, probably when I'm on holiday with a boot full of suitcases!). Any thoughts or any similar experiences?
     
  2. JR_130

    JR_130 Active Member

    Joined:
    Mar 24, 2009
    Messages:
    127
    Likes Received:
    1
    had a similar experience with the numberplate lights.
    i ended up putting a new (bespoke) cable between the lights and the nearest connector plug (in the ST it is in the nearside Qtr panel)
    the numberplate lights share a loom with the reversing sensors, so i wasn't going to replace that to get the lights working.
     

Share This Page