Hi. Got probs with my oem xenon lights. Basically what i want to do is obtain some new standard lights for my mk2 leon. Take them alart and add some decent ds1 projectors so i can use the oem ballasts and not waste money throwing new bulbs away. I realise ill lose afs and level control which dont work anyway. So is there a harness i can get or adaptors to plug in to the large lighting plug on each headlight to the light socket on the standard lights?? Thanks in advance
Harness for xenon lights
- Thread starter kevo13
- Start date
Feel for ya. I've just had the AFS pack in. I contacted a few "specialists" because I figured I'd do the same, just get some nice HIDs with maybe Audi drls fitted for way less money. None of them would touch it because apparently the harness is too complicated for anything other than OEM xenons. So good luck if you can get around that. But also, if you fit HIDs that don't auto level, it'll fail the MOT anyway I believe.
In the end, I had to fork out for an oem enclosure (water got in and burnt out the power pack) and new AFS power pack. Cost a small fortune. But I couldn't find any other way around it.
In the end, I had to fork out for an oem enclosure (water got in and burnt out the power pack) and new AFS power pack. Cost a small fortune. But I couldn't find any other way around it.
Ok thanks for that. Im probably looking at around £700-£800 . Can i ask approx how much did it cost you? Ballpark figure ?
Well for that cost ,the lights can stay as they are. Cos i havent that sort of cash around at the moment as ive only just found a job after months looking. Thanks for the help. Its appreciated
My lights dont just look nasty. Ive tried polishing the lens but the lens is dirty on the inside and the light output from both are crap to say the least.
Similar threads
