hi my gearlinkage cable has snapped at the gear box end so need a new 1. its on my abf how do i change it as never done 1 before its the bottom cable of the 2. can any1 help
if its like them, just get a spanner and pop them off the linkage. then just feed them through the holders (remove any clips and dont lose em) to the same for the other end on the gear lever.
yeah mate like that. i've noticed the gear box end they are held on by 13mm nut i guess i got to get under car gear stick end as got centre consol off but still cant get to the,
im unfamiliar with the abf, not sure if it uses same gearbox as the 8v. if its those type of cable the just pop off the linkage, dont need to undo anything.
im unfamiliar with the abf, not sure if it uses same gearbox as the 8v. if its those type of cable the just pop off the linkage, dont need to undo anything.
not yet going to tomoz mate been told i gotta take all centre consol out etc but every where seems to only sell both cables with shifter box but i only need the 1 cable
drop exhaust down, take off heat shield in tunnel, then undo 4 x 13mm bolts ( or 10mm's cant remember )
then the unit lowers down, remembering to take off the gear knob/gaitor. also assuming youve undone the linkage at the gearbox shift tower and undo the bracket on the gearbox.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.