Dismiss Notice
Hi Guest, stickers are now available from our online store. We've also updated our terms and conditions so check them out too.

Help with gaskets

Discussion in 'TDi - SEAT Diesel specific topics' started by teeth2k, Mar 27, 2017.

  1. teeth2k

    teeth2k Full Member

    Joined:
    Feb 8, 2003
    Messages:
    880
    Likes Received:
    0
    Can anyone point me to the right parts or part numbers I need to do a egr valve and inlet manifold clean, I'm looking for the gaskets but cannot find or shall I say don't want to buy the incorrect ones.
    Bxe engine
     
  2. Muttley

    Muttley Catch that diesel!

    Joined:
    Mar 17, 2006
    Messages:
    4,992
    Likes Received:
    27
    You're in the TDI section so neither of the cars in our signature seem relevant. Which engine do you have?
     
  3. teeth2k

    teeth2k Full Member

    Joined:
    Feb 8, 2003
    Messages:
    880
    Likes Received:
    0
    I also have a altea xl which has the 1.9 bxe engine pd 105. I haven't updated my signature as Iv only had it nearly 2 weeks now
     
  4. teeth2k

    teeth2k Full Member

    Joined:
    Feb 8, 2003
    Messages:
    880
    Likes Received:
    0
    Decided to go for a dark side egr delete
     
  5. verbal_kint

    verbal_kint Senior Member

    Joined:
    Apr 15, 2010
    Messages:
    603
    Likes Received:
    5
    I can't find anywhere that sells the EGR to intake gasket. Can't even find a part number for it on oemepc :/

    What's best, buy some gasket material or use silicon gasket?
     
    #5 verbal_kint, Jul 1, 2017
    Last edited: Jul 1, 2017
  6. verbal_kint

    verbal_kint Senior Member

    Joined:
    Apr 15, 2010
    Messages:
    603
    Likes Received:
    5
    Used blue silicon but didn't hold, so got some copper silicon instant gasket and that has held fine.

    Note to future self... read the damn instructions.
     

Share This Page