Separate names with a comma.
Discussion in 'Mk4 Ibiza Guides (6L) 2002-2008' started by mick-fr, Dec 22, 2010.
Sure is mate, good luck!
Hey Guys, Im Trying To Buy Some Hid's Off Yourhids And They Are Adamant That My 2007 1.2 Ibiza Requires A Canbus Kit And I Have Told Them That It Doesnt, I Am Right Arent I?
Yeah you are. It doesn't need it, but they will try force it on you as it probably costs more!
MOTs are only once a year.... Put your halogens back in for the test if you're worried about it... That's what I did.
I Used To Do That On My Red Ibiza Anyway
got mine through today.
Gonna give it a bash at fitting them tomorrow afternoon.
Sweet did you get slimline or standard ballasts? I should probably mount my ballasts properly...current they are just zip tied from the top, onto the wing.
Gonna mount them on the chassis rails like I did on my polo if I can
Only part I think il have an issue with is the connecting to original system. I have (as said in the first post on here) the two spade connectors (one black, one red) as this was different to my last set I installed
Fitted not too difficult
They are quite hard to photograph lol. Theres a really weird problem too. When i first turn them on the passenger one flicks on then goes off. The drivers stays on. So i have to turn them off again, then back on and the passenger one is then fine. Odd.
Make Sure Your Connectors Are Pushed In All The Way, Mine Did That Then I Just Unplugged All The Connectors Then Pushed Them All Back In And It Was Fine
Ah ok il try that. To be honest they were quite hard to get pushed and clicked in. If theyve been on for a while and i turn them off and back on theyre fine.
Will H4-3 Hid Kit Work On My Mates Pre-Fl Ibiza Headlights?
Should do mate, thats what I'm getting for my single reflector headlights.
Just fitted my H4 8000K HIDs...
Will get some pics up soon as the rain clears
Got my H4-3 HID kit in the post this morning!
Do I have to disconnect the battery to fit them?
Also I've worked out all the connections apart from the wires with the circular ends on them, two are black, the other is red. Do they connect to the car and the battery?
I didn't disconnect my battery
The four wires on each hid set push fit into the black electrical part on the bulb connector. Make sure you get the live and the neutral the right way round. I had to do a test to make sure they were right.
Connecting those metal black circles and the red ones are how the hids link into the original system.
Don't ask me why theres two black on one side and red and black on the other lol