Induction kit

[[email protected]]

Hi guys, my cupra mk1, I'm thinking of fitting an induction kit, this might seem a stupid question but if I did fit an induction, where does the pipe that goes to the SAI. Go? I don't want to delete the sai as I don't want the eml light on all the time and don't have the know how to fit a resistor thingy to delete the eml. Help please.

 

[DrewCole]

The hose that goes to the SAI just uses the airbox to filter the air before going to the pump itself, so all you need to do is buy a breather filter and clamp and secure it to the end of the hose with the engine bay somewhere.

 

[[email protected]]

Thanks ever so much for That! Do you have one on yours as I'm not 100% sure which to Get?

 

[The-Goose90]

My ramair induction kit came with an extra filter a cheap one but it did the job clapped it on to there and secured it underneath with a cable tie.


Sent from my iPhone using Tapatalk

 

[diponio24]

The jatex one comes with a little extending pipe on the filter

Sent from my RAINBOW using Tapatalk