Separate names with a comma.
Discussion in 'Ibiza Mk3 (2000-2002)' started by TommyCupra, Jan 6, 2008.
I got an Forge elbow (in blue) and Forge joiner for sale if anyone wants it. 20 quid delivered.
PhilW Im in! Ill PM you
BTW - The joiner elbows are 135 degrees , and not 45 .
45 creates a tight V shape - a U-turn in fact .
135 degrees is the geometric equivilant of what's in all your photos . from TIP to MAF that is .
Check out this shop for the right elbows .
notice furthr into each degree section, the angles drawn , and picture your engine bay area from TIP to MAF .
This looks perfrct and long - 2 x 152 mm.
So is a straight piece of silicon hose called a 180 degree elbow? lol
Most companies (like forge and samco) label the elbows by the amount of degrees "off straight" the elbow is.
Different companies give them different angles .
I'm just saying geometricly the joiner we need isn't 45 but 135 .
old thread bump, just to make clear as im ordering the jetex setup with the forge silicon tubing, what size does the bend have to be? Some say 45degree some say 135degree? Can anyone clarify?
FMA45-70_Black-[New Code] - 70mm 45° Elbow Silicone Hose
That's what I ordered from Forge and it was the right one
Search for that on Ebay too as I found it cheaper than their website and it came with a Forge part number and sticker...
Not going to buy mine from forge as they only do blue! Going to get the elbow from SFS performance as they can do red pipes In keeping with my colour scheme!
Any Pics of engine bays with these fitted. pref with blue pipes please as im looking to order one today =]
Look at all the pages in this thread...
Lots of them are broken links now as the thread is old now. hense why i was asking =]
Search for "jetex filter" and there are loads of threads on this, some have pics
:sorry for the dumb question but will this defo fit mine ?
with a 70mm neck size as it was the neck size i not 100% on thanks
you obviously didn't bother reading the thread...
Lol next time just read the thread
i did read it hence the info is correct i just wanted to be sure! as there was 3 different FC-07003 ! but thanks for clearing it up guys!
what shape would you say is best for fitment ? Cylindrical Filters or Conical Filters as in one you cant get a chrome top only rubber but seems like most ppl went for Cylindrical Filters ?
Mine arrived Friday, got the filter from Jetex, and the Samco hosing, hose joiner and clips from MerlinMotorsport.
At the moment just fitted the filter on the end of the MAF, as the samco hose elbow looks like its gonna need a fair bit cut off it as it's a very tight fit in that engine bay!
What Jetex filter did you buy? Pics?