Pretty sure all Scirroco are common rail and not PD or PPD so the issue above wont trouble the Rocco.
Ok, I have done 2 tanks of fuel with injector cleaner in them. Car still runs a bit lumpy on tick over. If my leon fr has the later injectors any idea of the part number ? Can i get the part number without taking the injector out of the car ? Thanks for any replies.
Try going online to euro car parts or a parts website, put your reg in and look for injectors for it. Euro shows compatibility for the engine code so you should know for sure which ones are for your car. Have you have it serviced? Mine cut out on it’s own for the first time in months the other day, was after a horrendous downpour so I think it’s related to water getting in somewhere. Sent from my iPhone using Tapatalk
I have a 58 plate Leon FR 2.0TDI PD170, engine code starts BMN. I called Seat and they say there was no recall for my car? A bit worried as I suddenly have white smoke on when its running cold. I checked on euro car parts and it lists common rail injectors for a CEGA, could this be why they say theres no recall? Any idea what else I could try? Cheers!
The CEGA injectors won’t fit your car surely if they’re for the common rail engine and yours is PD. They earliest CR models were 59 plates as far as I know. Search this thread as people have shared links to stuff they have sent and the responses from seat to have this fixed. Sent from my iPhone using Tapatalk
My Leon FR PD170 TDi was very hard to start and down on power and puting light blue smoke out, so i started with the cheaper option first I bought a second hand fuel vacum pump and changed it £40 , but still down on power so i went deeper took out injectors and they seemed to have been leaking badly so instead of changing the seals i went for seconhand injectors out of an FR PD170 TDi £100 lucky full power again and starting first kick hope this helps just my experience.
