matts r- t e c h stage2 lcr ( new parts for next stage for car) forged rods :)
- Thread starter matt88 lcr
- Start date
Good stuff, I got the same boost hoses last week. I found mine were a bit too long tho, going to have to trim them to get them to fit. Are yours OK? The worst bit on mine was the one going to the throttle body, because it's too long it causes the bend down at the bottom near the battery to compress. I notice you seem to have a different MAP sensor tube though, maybe that fits it better.
Couple of quick questions - did you have to move the battery at all to get that MAP sensor tube fitted? Also, can't remember if I asked this before - have you got a link to wherever you got your Apexi filter?
Engine bay looks good
Couple of quick questions - did you have to move the battery at all to get that MAP sensor tube fitted? Also, can't remember if I asked this before - have you got a link to wherever you got your Apexi filter?
Engine bay looks good
hi mate i trimed about 20mm off the end of the hose think i could of cut abit more off tho may do it at some point as it has got abit of a bend in
the map sensor tube is a forge one mate changed it to tht as standard one split did have to cut the battery tray to get it in.
got the apexi off ebay mate might change to the bmc cone at some point
matt
the map sensor tube is a forge one mate changed it to tht as standard one split did have to cut the battery tray to get it in.
got the apexi off ebay mate might change to the bmc cone at some point
matt
Matt, as Richard (RDS) has said, this is coming along really nicely now.
Loving this bay and what you've done/are doing with it. Keep it up mate, great effort and nice to see another modder carrying on through the winter.
Proper petrolhead. Fitted my new MAF in -2 last night lol, had to be done
Loving this bay and what you've done/are doing with it. Keep it up mate, great effort and nice to see another modder carrying on through the winter.
Proper petrolhead. Fitted my new MAF in -2 last night lol, had to be done
cheers tom
i enjoy my cars modding them and driving them not goin to let the cold weather stop me lol
matt
i enjoy my cars modding them and driving them not goin to let the cold weather stop me lol
matt
Cool, cheers for that. I'll start at maybe 25 or 30mm and see how that fits.
If you do go for the BMC cone then let me know, I may be able to "dispose of it responsibly" for you
yra just trim 10-15 mm and trill fit them dont want to take to much off coz there only bend the other way instead
goin to see how the apexi is once get stage 2 map then go from there it did me well on stage 1 just asmall filter but then there fine on 500hp jap motors so must b capable for wht a lcr needs
matt
goin to see how the apexi is once get stage 2 map then go from there it did me well on stage 1 just asmall filter but then there fine on 500hp jap motors so must b capable for wht a lcr needs
matt
Got these 15mm spacers got a set of 10 mm ones coming as well and waiting for my longer bots to come should make the car look abit better and handle abit better to
Also did this during the week when was board lol
Matt
Also did this during the week when was board lol
Matt
Last edited:
new bits
got my spacers and bolts 15mm rear and 8mm fronts
rear strut brace
wheel cleaner and wax to give the wheels and gd clean and wax whilr there off when fit the spacers
got something coming next week witch i cant wait for lol
matt
got my spacers and bolts 15mm rear and 8mm fronts
rear strut brace
wheel cleaner and wax to give the wheels and gd clean and wax whilr there off when fit the spacers
got something coming next week witch i cant wait for lol
matt
cheers
haha cant do tht lol i fancy a change so thought y not and ordered a little something lol
matt
haha cant do tht lol i fancy a change so thought y not and ordered a little something lol
matt
Similar threads
