Mini ISO to RCA?

[cupraNCS]

Just got this so i could connect my amp to standard head unit

http://www.autoleads.co.uk/head_unit_adaptor.html

it does fit in but u have to take out the block wich has the wires for the aircon and stuff and when u do this the aircon is stuck on

so just wondering if anyone has any ideas how i could connect this up any other way?

 

[fozzie-foster]

I was looking for something like that, when i came across this....

http://cgi.ebay.co.uk/ws/eBayISAPI....MEWN:IT&viewitem=&item=220130293904&rd=1&rd=1

Haven't received it yet, should be with me in the next few days but it looks the part.....hopefully it'll do the job!!

 

[cupraNCS]

By using that does that not mean u will lose 2 of your speakers?

 

[fozzie-foster]

I have no idea lol....but if so i'll just cut out the back speakers and run my 6x9s through a second amp!

 

[truCido]

By using that does that not mean u will lose 2 of your speakers?

looks like you just need to splice in so no you shouldnt

 

[fozzie-foster]

looks like you just need to splice in so no you shouldnt

Yeah, or do that LOL

 

[cupraNCS]

Could i splice in some speaker wire from the front speakers and connect it to the high level input on my amp?

 

[truCido]

Could i splice in some speaker wire from the front speakers and connect it to the high level input on my amp?

indeed you could

 

[cupraNCS]

Or could i run some extra speaker cable either side from this block (which is for my 6x9's) and conect 2 the high level input on my 2-chnl amp?

 

[Fl@pper]

doesnt the top connector break into 3 ?

i know the leon did cos i added headphone sockets on one once

 

[cupraNCS]

Yeh it breaks into 3 but when i replaced the yellow one withe the ISO to RCA connector when i turned on the ignition the aircon came on and all the functions for it wouldent work or show on the display

 

[Fl@pper]

you did wire up the front panel securely ?

the grey strip at the front

 

[cupraNCS]

Yep the grey ribbon cable was connected

 

[Fl@pper]

have a look on icecavern.com there should be a pin out diagram there for you to check it out with

 

[cupraNCS]

Couldent see anything on there m8, might just have a go tying to connect it up using the high level input from my amp

 

[Fl@pper]

http://www.icecavern.com/forum/index.php?showtopic=112&hl=pinout

For the Leon Aura unit but may help ?

All viewed into connector on head unit

Section 1 - Not all of these are available on the Aura v4 (Headphone, Telephone, External Display)
1 Not Connected
2 Not Connected
3 Headphone Out GND
4 Headphone Out L
5 Headphone Out R
6 Switched (+12V when unit is on)
7 Telephone Audio In Signal
8 External Display Clock
9 External Display Data
10 External Display Enable
11 Remote ( Not sure of its function )
12 Telephone Audio In GND
13 CD Data In
14 CD Data Out
15 CD Clock
16 +A CD (Not sure of its function but related to CD changer)
17 Switched Power to CD
18 CD Audio In GND
19 CD Audio In L
20 CD Audio In R

Section 2 Speakers
1 RR+
2 RR-
3 FR+
4 FR-
5 FL+
6 FL-
7 RL+
8 RL-

Section 3 Power
1 Speed Sense Wire
2 Telephone mute - Active low - Take to 0V to mute
3 OBD Diagnostics
4 Switched Ignition +12V
5 Antenna control (+12V when unit is on)
6 Illumination
7 Permanent +12V
8 Ground 0V

 

[cupraNCS]

Well from looking at that the part i disconected to fit the ISO adaptor would take up numbers 1-6 and none of them seem to be anything to do with the climate control and its functions