1. Hi Guest. We've recently updated our forum rules. Please take some time to review them. You can read the new rules here
    Dismiss Notice
Dismiss Notice
Hi Guest, stickers are available from our online store.

mk2 Useful Parts + info List

Discussion in 'Mk2 Ibiza/Cordoba FAQ's (6K) 1993-1999' started by Fl@pper, Sep 27, 2008.

Tags:
  1. Fl@pper

    Fl@pper Back older greyer and less oilier but always hope
    Moderator

    Joined:
    Jun 19, 2001
    Messages:
    12,402
    Likes Received:
    26
    as there is a few part numbers and tweaks and tricks about the forum that are all in the name of saving time/money i thought i'd start a parts list off for easier reference (any additions feel free to add:




    Inner CV Driveshaft Bolts

    As the VW original multi spline ones are well at best 'soft' and shouldn't be reused as you can gaurantee one will round off when rerplacing them use the stronger Allen headed version available from local Ford Dealer - cheaper too *edit 2009* now supplied Torx 6 Type but still just as strong and put VW ones to shame

    pt/no 6769287

    be 100% sure you replace the double washers as without these your shaft bolts will work themselves loose and usually drive the shaft out the bottom of through the gear box casing

    [​IMG]
     
    #1 Fl@pper, Sep 27, 2008
    Last edited: Apr 18, 2009
  2. Fl@pper

    Fl@pper Back older greyer and less oilier but always hope
    Moderator

    Joined:
    Jun 19, 2001
    Messages:
    12,402
    Likes Received:
    26
    Caliper Slider Pins

    Lucas type Caliper Slider Pins


    The Ibiza 256/280mm brakes share the same caliper but with different frames to which the slider pins have a habit of siezing up from road crud and lack of maintenance and usually need drilling out

    VAG only supply them with a new complete frame and the GSF kit is only the rubbers to cover them with some grease but a supply is available.

    FORD part number - F6141154 (pack of 2) £8.00 + vat roughly (inc grease)

    can confirm they fit perfect to the front and will evaluate the rear also as i think they are shorter but i will update details as they come.
     
  3. just got my hands on a seat ibiza 2.0 16v 150bhp as standard just woundering what will i gain from a remap would it be bout 190 ? and what could you suggest to make it go quick, will i feel a different with fast road camshafts, and will alot of new ibiza parts fit in the 1999 model ? just wanting to make it into my little project, make a sleeper out of it, cheers.
     
  4. is it possible to make my 1999 ibiza cupra 16v 2.0 pop when it redlined what would i have to do to gain this ?
     
  5. old 'uns

    old 'uns Modern Life is Rubbish...

    Joined:
    Mar 20, 2003
    Messages:
    1,633
    Likes Received:
    2
    at least 151 unless yours is Big Pete's old one then it'll be 144:rofl:
    cams possibly but probably not enough for the money involved
    you could probably fit an air freshener, should fit both models

    ignore the redline in every gear, it'll go pop alright

    you'll spend a lot of money for little gain for what you appear to want
     

Share This Page