mods help please

neilf

Active Member
Feb 19, 2012
80
0
falkirk central scotland
Hi there when I got my cupra it was ment to have a few engine mods but turns out it doesn't have any. It was ment to have bigger injectors 4 bar fpr ko3s turbo exhaust system and a front mount intercooler. It only had intercooler and exhaust . I am going to buy the mods that aren't on it but don't know what to get can anyone help . What is the best mods to do?:confused:
 
May 25, 2008
2,400
1
cambs
1st you don't need bigger injectors for a ko3s
4 bar fpr is only needed if the mapper requires it ( Jabba or revo iirc)
Has it got the ko3s fitted ? Simple check how many vac lines go to the actuator ?
 

Big-Pete

Always on the Limit
Aug 8, 2010
3,032
2
btw 4 bar fprs are a bout 40quid from awesome gti and fit where the old one is.
 
May 25, 2008
2,400
1
cambs
Standard injectors are fine and if you fit a 4 bar when it's not needed it will over fuel
They are only fitted when the map requires it
When you fit the ko3s get it mapped in to release its potential then the mapper may fit a 4 bar if required like Jabba did for mine
 
May 25, 2008
2,400
1
cambs
Jetex filter , what downpipe are you running ?
If std get a Decat or sports cat dp from blueflame or miltek
Depends how far you want to go with it
 
May 25, 2008
2,400
1
cambs
No offence but I would say that's dyno lottery !
Ask bill on his opinion on this but I've never heard of one pushing over 240 without being hybrid
Or nitrous or wmi
 

neilf

Active Member
Feb 19, 2012
80
0
falkirk central scotland
Right ok god sake if a new what I was talking about I wouldn't be asking for help. That's what I got told from him he obviously is talking **** that's why I want to go hybrid if possible.
 
May 25, 2008
2,400
1
cambs
1. Hybrid turbo
2.forged rods
3. 3" maf with Ibiza element
4.silicone tip to suit turbo and maf
5.map to suit set up
6. Injectors
7. 4 bar fuel pump
Possibly a ported exhaust manifold
That's all I can think of at the moment
 
Adrian Flux insurance services - discount for forum members.