1. Hi Guest. We've recently updated our forum rules. Please take some time to review them. You can read the new rules here
    Dismiss Notice
Dismiss Notice
Hi Guest, stickers are available from our online store.

Mounting bolts for engine & transmission - AYP & EWP box??

Discussion in 'Mk3 Ibiza FAQ's (6K2) 2000-2002' started by str8ballin, Jun 15, 2007.

  1. str8ballin

    str8ballin Active Member

    Joined:
    Feb 27, 2007
    Messages:
    211
    Likes Received:
    0
    Hi every1....... Please help!!!

    I need the bolts to join the gearbox to the engine but I cant find the part numbers anywhere & SEAT cant help either!!

    For Ibiza cupra - AYP engine & EWP gearbox code.

    I have ETOS but it only shows regarding the cupra r EDT gearbox.

    I ordered some bolts which are underlined below in the image but only the first 2 fit!

    Also they only gave me 5bolts, im sure there are 8.

    Does anyone have the part numbers I need please! I cant belive even SEAT's software shows the same as my ETOS... nothing about the EWP box[:@]

    I will really really appreciate any help.... its stopping me from putting my car together:( ....

    Many thanks in advance!

    [​IMG]
     
  2. Fl@pper

    Fl@pper Back older greyer and less oilier but always hope
    Moderator

    Joined:
    Jun 19, 2001
    Messages:
    12,402
    Likes Received:
    26
    EDT and EWP share the same body housing and yes ETKA does show the same as ETOS

    but the answer is listed in your pic ;)

    item 1
    N10337803 * 2
    N10337902 * 2
    N90701604 *1
    N90743502 * 1

    item 2
    N90572901 * 2

    item 3
    N10261302 * 2

    i make that 8 bolts and 2 nuts :)

    the brackets around the item number means the part is not shown or unable to be shown in the diagram but as there is no listing in model except aluminium they are for all codes - in item 2 there are specific coded bolts for each trans so pick carefully

    i think ive listed em right but check just in case

    easy when you know how ;)
     
    #2 Fl@pper, Jun 15, 2007
    Last edited: Jun 15, 2007
  3. str8ballin

    str8ballin Active Member

    Joined:
    Feb 27, 2007
    Messages:
    211
    Likes Received:
    0
    Thanks so much Fl@pper!
    So if i order the items u listed below that should b right?
    The longest bolts ( N90572901 * 2) I tried to fit to the engine and they do fit but they are slightly smaller in diameter than the engine holes they fit into...
    I assumed they are not right unless thats how they fit!

     
  4. Fl@pper

    Fl@pper Back older greyer and less oilier but always hope
    Moderator

    Joined:
    Jun 19, 2001
    Messages:
    12,402
    Likes Received:
    26
    the longer 10mm ones from memory have nuts on the back so look like the go through the engine/box and engine mount at a guess and simply squeeze up

    it was very similar on my 16v but the nuts were welded as part of the mounting bracket

    check out
    main group 1
    sub group 99
    illustration 199-20

    shows the mountings etc there - should help a bit

    worth noting a point that nearly all diagrams in ETOS and ETKA show a point of view as though you were looking at the car from the NSF corner

    like this angle :

    [​IMG]
     
    #4 Fl@pper, Jun 16, 2007
    Last edited: Jun 16, 2007

Share This Page