Dismiss Notice
Hi Guest. If you're not subscribing to us on YouTube yet, you're missing out on car news and reviews. Subscribe to our channel to get notified when we post new videos.

My mk3 Ibiza cupra ko3 Hybrid

Discussion in 'Readers Rides (SEAT)' started by ntcupra, Sep 15, 2012.

  1. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Hi all!
    Just wanted to show off my ride, bought her completely standard in July 2010 with 34000 miles on :)

    All comments welcome good or bad ;)

    [​IMG]

    Spec on the car now

    Badger 5 custom map
    Wideband conversion
    4 bar pressure reg
    550 Bosch injectors
    Vr6 clutch and g60 flywheel (7kg)
    Jetex cone filter
    Large toyo sport Front mount intercooler
    Forge 007 now
    Front and rear strut brace
    Fk coilovers
    3 inch exhaust system
    Ko3 hybrid turbo with 60mm intake
    Pro race 1.2's
    Window tints
    Sytec fuel pump
    H&r trak+ rear spacers
    Removed SAI
    Forge oil and water caps
    Mk4 golf washer bottle
    Boost and oil temp gauges
    Removed carbon canister
    Wind deflectors
    Forge map sensor pipe
    Removed rear wiper
    Oil catch can
     
    #1 ntcupra, Sep 15, 2012
    Last edited: Feb 6, 2014
  2. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    First off I got some alloys, pro race 1.2's

    [​IMG]
     
  3. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Then I needed more power, just couldnt help myself! So I went revo stage 1 and loved it :D but after a few months I got bored of the power so I started getting ready for revo stage 2, so I began putting a jetex cone filter on, forge 007, front mount intercooler and a cat back exhaust system, so we got it on the dyno and the turbo started dying :( so then decided to go down the hybrid route
     
  4. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Just a quick pic of my intercooler and the Lcr splitter

    [​IMG]

    Quite close getting out of my drive way
     
  5. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Then I lowered my car on fk coilovers

    [​IMG]
     
  6. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    On wednesday I went to welsh coast customs and had a new exhaust system 3 inch all the way in to a 6x4 oval back box, and I love it :D they've done a really good job so thank you team at welsh coast!!
     
  7. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    This Friday I've done the relocation on the dump valve got a front upper strut brace and sprayed it blue :)

    [​IMG]


    Quick pic of it all fitted

    [​IMG]
     
  8. NAB_ARCK_86

    Joined:
    Oct 5, 2011
    Messages:
    547
    Likes Received:
    0
    Looking good dude
     
  9. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Thanks mate
     
  10. Chambers_CUPRA

    Joined:
    Oct 29, 2011
    Messages:
    3,499
    Likes Received:
    0
    Looks very tidy :)
     
  11. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Thanks chambers, wish I started a readers ride when I first had the car
     
  12. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Look what turned up for me today :p all thanks to dpm


    [​IMG]

    [​IMG]

    Shall be fitting these later ;)
     
  13. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    A pic for them fitted

    [​IMG]
     
  14. Jokerman261

    Jokerman261 James

    Joined:
    Apr 9, 2012
    Messages:
    400
    Likes Received:
    0
    Very clean, spacers always make a good difference on thinner wheels.
     
    #14 Jokerman261, Oct 2, 2012
    Last edited: Oct 2, 2012
  15. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Thanks for the comments so far, don't know if I should do my bump strips front and back gloss black
     
  16. Chambers_CUPRA

    Joined:
    Oct 29, 2011
    Messages:
    3,499
    Likes Received:
    0
    These look alot better with spacer

    Top work
     
  17. Neil82

    Neil82 Full Member

    Joined:
    Nov 25, 2001
    Messages:
    546
    Likes Received:
    0
    What size spacers are they
     
  18. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1

    20mm, seem to sit nice :d
     
  19. Chambers_CUPRA

    Joined:
    Oct 29, 2011
    Messages:
    3,499
    Likes Received:
    0
    Do yours rub slightly?
    My off side rear rubs abit and mines stripped out lol
     
  20. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Did a little test last night and didn't seemed to rub mate, mines also stripped out ;)
     
    #20 ntcupra, Oct 3, 2012
    Last edited: Oct 3, 2012

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice