Dismiss Notice
Hi Guest. If you're not subscribing to us on YouTube yet, you're missing out on car news and reviews. Subscribe to our channel to get notified when we post new videos.

My mk3 Ibiza cupra ko3 Hybrid

Discussion in 'Readers Rides (SEAT)' started by ntcupra, Sep 15, 2012.

  1. ibizacupra

    ibizacupra Jack-RIP my little Friend

    Joined:
    Jul 25, 2001
    Messages:
    31,328
    Likes Received:
    14
    hybrid of any worth should run an 80mm maf housing

    lupos hybrid+ runs 3" intake to turbo.. help it flow, helps it make 300bhp from just 16psi of boost ;)
     
  2. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Bill do you think that now I'm running a hybrid with a 60mm tip bolted on to the turbo could be creating too much flow for the standard ibiza maf's and now need to go 3 inch hosing and maf?

    Thanks for the reply guys keep them coming ;)
     
  3. R4cup

    R4cup Beef NO Burger

    Joined:
    Jul 28, 2006
    Messages:
    1,755
    Likes Received:
    5
    :funk:
     
  4. yellonvi-R

    yellonvi-R Active Member

    Joined:
    Sep 8, 2011
    Messages:
    4,336
    Likes Received:
    3
    So you can run a standard ibiza maf but to get better flow up it to a 3inch. But you dont have to.....
     
  5. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Ok thanks andy, been told to also try going back to a 3bar fpr
     
  6. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Been ages since I've updated this, lost all love for this car about 2 months ago and sold the car ( no money taken ) but the kid was coming to pick it up a few days after he looked at it, but couldn't go through with getting rid of her so had to let the kid down, theses cars really get you down when not running right! So plans for the car now is to get rid of the revo map and go for a nice custom map, so I shall be getting lcr injectors and 80mm maff! Need to also get my clutch and fly fitted that I've had sat in my bedroom for months, will be asking for the map to be kept below the 300 torque barrer if its goes over that, then ill be doing the rods ;) still undecided weather to go down the wideband 7.5 ecu and have the full works yet :)
     
  7. yellonvi-R

    yellonvi-R Active Member

    Joined:
    Sep 8, 2011
    Messages:
    4,336
    Likes Received:
    3
    To be fare mate rods can pop anytime. I've had 2xaudi Tt 225 quattros to break and both running standard boost with holes in the blocks.
     
  8. Chambers_CUPRA

    Joined:
    Oct 29, 2011
    Messages:
    3,499
    Likes Received:
    0
    Rods, Fit and Forget
     
  9. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    [​IMG]

    Ordered all this on the weekend :) shall be ordering rods at the end of this month, then all I need to get is lcr injectors,80mm maff and cone filter, oh and get my clutch and fly fitted after 6 months of being on my bedroom floor ;) then I'll be ready for a map :D can't wait
     
  10. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    [​IMG]

    Not much more to order now, kind of losing place in my bedroom now so need to get a move on and get most of this fitted :)
     
  11. Lukey GTI

    Lukey GTI Guest

    is this the toyo intercooler ?

    Iv been looking at getting one but struggling to find someone to fit it for a good price as im useless with fitting :whistle::(
     
  12. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    One of the toyo's mate there's a few different sizes about, this is the one that needs the rad moving back and the air con removed to fit as its that big ;) plus I know someone that's very good at fitting them :) he's giving me a hand in the next few weeks
     
  13. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Been busy on the weekend with mcfunbot :)

    [​IMG][​IMG][​IMG][​IMG][​IMG]

    Clutch and flywheels being fitted next week, then leaving the car with the god (bill) in November for rods,custom map, gear based boost,launch control,225 injectors and 3inch maff :) can't wait
     
  14. Chambers_CUPRA

    Joined:
    Oct 29, 2011
    Messages:
    3,499
    Likes Received:
    0
    Looks really smart mate:)

    Did a good job there. Bet you can't wait to have rods fitted to unleash its real power :)

    When did you see Martyn?
     
  15. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Cheers chambers :) ye not long now, was up his on Saturday working on it with his broken ankle lol
     
  16. Chambers_CUPRA

    Joined:
    Oct 29, 2011
    Messages:
    3,499
    Likes Received:
    0
    Was gunna say about his ankle lol

    X-ray look awful lol
     
  17. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Yea it did :/
     
  18. mc funbot

    mc funbot its a beast its got boost

    Joined:
    Jan 29, 2010
    Messages:
    1,473
    Likes Received:
    3
    I hate being broken!!
     
  19. ntcupra

    Joined:
    Jul 21, 2010
    Messages:
    570
    Likes Received:
    1
    Ha how's the leg pal? Clutch and flywheels now fitted :) clutch is so much lighter now feels really weird ha
     
  20. Chambers_CUPRA

    Joined:
    Oct 29, 2011
    Messages:
    3,499
    Likes Received:
    0
    What clutch you got tulip?

    Solid fly? How much and where from if ya don't mind me asking ;)
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice