Dismiss Notice
Hi Guest, stickers are available from our online store.

MY01 Leon Cupra now with CCFL angel eyes 2 1/2" dp-200cell cat and one box

Discussion in 'Readers Rides (SEAT)' started by LEE69, Mar 31, 2008.

  1. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    Thanks
    H1 6000k have arrived, just waiting on something else to come ;)

    Don't ask no questions, you don't get told no lies ;)
     
  2. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    Got my 8cm CCFL through today but ones broke (my mistake :() so could only test one light.

    This is about 70% as i need to "fettle" the rings, so they sit closer to the actual angel eye.

    [​IMG]
     
  3. Nef

    Nef Looking Rather Dappa

    Joined:
    Mar 30, 2009
    Messages:
    626
    Likes Received:
    0
    just read the whole thread, some nice mods youve done mate
     
  4. kineticz

    kineticz Forever moddin'

    Joined:
    Jul 23, 2008
    Messages:
    1,958
    Likes Received:
    0
    Niiiiiice [B)]
     
  5. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    Thanks :)

    They are soooooo bright i will need them shades. :D
     
  6. epts2008

    epts2008 rule the bends

    Joined:
    Mar 19, 2009
    Messages:
    281
    Likes Received:
    1
    Cars looking pretty nice there done some nice modifications not a fond lover of the debadged grill personally you thought of keeping a badge and going for the honeycomb cupra grill? looks the nuts even if you just get the centre like I did today with a chrome surround looks pretty smart heres a pic of it ...
    [​IMG]
     
  7. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    Chrome and black might go, but not for me I'm afraid.
     
  8. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    I have everything now i need, honestly progress is being made :roflmao:

    Need to get a new glue gun.

    I have a spare set of angel eyes (non seat) and was soooo considering doing what Unclefester as done, ie putting a set of projectors as high beam too but i CBA going though all that.

    [​IMG]
     
  9. UncleFester

    UncleFester Grumpier by the day!

    Joined:
    Apr 30, 2006
    Messages:
    4,764
    Likes Received:
    0
    haha well you could since you have all the bits to hand - are you going to make the angel rings easy to change? Will be a royal pig of a job otherwise.
     
  10. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    If they go no other choice but headlights out anyway, H1's fit now dremeling is calming, almost like cleaning a footway with a power washer :D
     
  11. UncleFester

    UncleFester Grumpier by the day!

    Joined:
    Apr 30, 2006
    Messages:
    4,764
    Likes Received:
    0
    Agreed with that, much the same as getting high on fibreglass fumes .... out of interest how 'deep' are the projector units in the other set of lights? The only reason i had to screw about was because of the depth of the units i had .
     
  12. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    Not sure tbh they are all still sealed in the headlights, and the seal is a "warm me up job" but, damn, got me thinking now lol
     
  13. UncleFester

    UncleFester Grumpier by the day!

    Joined:
    Apr 30, 2006
    Messages:
    4,764
    Likes Received:
    0
    If you need access to my PB account to have a look at what is involved, just pm me and i'll send you the link. It's time consuming as opposed to difficult.
     
  14. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    Been there already, Thanks :)
    The thing is though you don't get the different high beam pattern, as it is just the same as the dipped, but then again, i can't recall the last time I used my high beam since having HIDS
     
  15. UncleFester

    UncleFester Grumpier by the day!

    Joined:
    Apr 30, 2006
    Messages:
    4,764
    Likes Received:
    0
    Yes you do because you turn the light unit upside down or take off the blank and fit it the other way up - this giving you different beam - or in my case you just remove it ;)

    MOT doesn't test beam pattern on main beam because there isn't one :)
     
  16. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    Just offered the dipped beam bulb case ( does it have it's own name?) and it's the same depth.
     
  17. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    Thanks :)
     
  18. richellis

    richellis Active Member

    Joined:
    Feb 29, 2008
    Messages:
    391
    Likes Received:
    0
    Just read the thread, some nice mods, and write ups there!
     
  19. LEE69

    LEE69 Stage 2 Revo'd

    Joined:
    Dec 10, 2004
    Messages:
    21,263
    Likes Received:
    65
    Thanks mate.

    Glue gun is coming so be able to get on with it then.
     
  20. kineticz

    kineticz Forever moddin'

    Joined:
    Jul 23, 2008
    Messages:
    1,958
    Likes Received:
    0
    These angel eyes are taking ages lol :p
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice