Separate names with a comma.
Discussion in 'Badger5' started by ibizacupra, Sep 1, 2011.
What total am i looking at then bill? Thanks.
I have a V 2.something on the LCR currently but have just picked up a BAM S3 too and will be getting another of these kits from you soon. As the V3 thread is locked, can you please elaborate on (apologies if already in here somewhere and I missed it....):
"This product sits along side the also revamped Version 2.2 Billet Alloy version offering majority gains of the V2.2 Billet Versions but for less Cost."
Just to be anal, is that the majority of the performance gains over a V2.2 for less cost or it outperforms the V2.2 and costs less?
If there are performance dowsides to the cheaper V3, I would really like to know before getting that instead of the V2.2 thanks
Surely £149 + VAT = £178.80 + £10.70 for postage = £189.50
Cheers big man
billet version has seamless internal bore so no bumps to disturb flow, so is the better flowing product. The silicon only one offers almost the same power/torque gains of the billet but cannot by design be as seamless flowing internally.. It shares the same taper geometry of the billet version but for me ranks and a close 2nd in overall Best in Class hi-flow tip terms.
I offer 2 versions to suit peoples budgets
Thanks for the reply, was exactly as I thought. I was weighing up the fact that it was one less part to put on/come loose etc and easier for me to fit before taking the car for a remap on the S3.
Saying that, the V 2.x on the LCR has held perfectly, including me taking it off once or twice. I will go for the full fat version for this one too thanks.
Hi Bill do you have a black V2.2 on stock?
I fitted my V2.2 TIP today, replacing the old V1.
Evolution of the TIP!
V2.2 on the left V1 on the right.
That looks great, can you feel any difference.
Nice work dude, should get a bit extra out of the bigger TIP. That adaptor looks good, tempted to get one of those for my v2...
Hi bill do you have a red v2.2 kit in stock with heat shield and red filter
How much inc delivery
£149 tip, £45 bmc, £29 heatshield
uk mainland delivery is £10.70
in stock again weds
Bill does the kit come with the billet and all the clips needed
Do you have any black hoses in stock?
I'm after one with the adapter and hose clips too.
black V2.2 I would need to get in... only have blue/red in those here now. V3 have black
Whats the difference between the V2.2 and the V3?
It is how the pipe joins the turbo?
one billet to turbo one is silicon direct.
billet has seamless internal flow path, (no bumps in flow) and is technically the higher flowing version. Both TIPs share the same taper geometry however, and in practical terms, measured, they both perform very close to each other.
Chasing ultimate flow V2.2
Wanting the best for the price V3 (which is why I also offer this... its cheaper and gives majority gains of the more expensive to make V2.2 one)
all hose clips are included (high quality JC High Grips) and the billet is retained by single grub screw and advised to also smear a thing bead of silicon on assembly.. << all covered in the Fitting Instructions posted on my section.
Hi bill do you have These In stock in red?