Dismiss Notice
Hi Guest. If you're not subscribing to us on YouTube yet, you're missing out on car news and reviews. Subscribe to our channel to get notified when we post new videos.

OBDeleven encodings

Discussion in 'Mk6 Ibiza Guides 2017 -' started by Ghost45, Aug 10, 2019.

  1. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    Hi everybody are welcome and i write this thread for helping everybody to make mods on your cars (Seat Ibiza 2019).
    I write here but i have tested in my italian forum www.Ibizatuningclub.com all of these encodings written here.
    I ask to all of you to help me to discovered new codes and to have help each others.

    Many thanks to Mods and Admin to give me opened this thread here.
    Many thanks to my italian friend Zephyr to test these codes with me.
     
    #1 Ghost45, Aug 10, 2019
    Last edited by a moderator: Aug 10, 2019
    Aroza, Jimbobcook and Twix like this.
  2. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    Pay attention to what you change, I take no responsibility for problems.
    Before start with test codes make a backup in your OBDeleven app.
    Advice on how to improve this guide is accepted.
    If you have encodings that are not on this list, write them in a post and I'll add them, thanks.

    CATEGORIES
    ACCESS CODES
    LIGHTS
    SOUNDS AND NOTICES
    MULTIMEDIA
    INSTRUMENT PANEL
    OTHER
    LIGHTS ERRORS


    ACCESS CODES
    (menù long coding)

    C.U. 01 (Engine): 27971
    C.U. 03 (Brake): 40168
    C.U. 09 (Central Electrics): 31347
    C.U. 13 (Adaptive Cruise Control): 20103
    C.U. 17 (Dashboard): 25327, 47115
    C.U. 19 (Gateway): 20103
    C.U. 44 (Steering Assistance): 19249
    C.U. 5F (Multimedia): 20103
    C.U. 76 (Parking Assistance): 71679

    1)
    Fog lights with high beams [WORKING]
    It allows the fog lights to turn on when the high beam headlight is operated, either flashing or fixed.
    This coding has a "side effect": when you engage reverse gear, the front fog lights will activate. To overcome this, do the following coding as well.
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Leuchte12NL LB40

    3b. Dimming_CD_12: change the value to “100” [Standard: “0”]3c. Light_Function_D_12: change the value to “Lichthupe” [Standard: “Not active”]3d. Dimming_Direction_CD_12: change the value to “Maximize”

    4. Leuchte13NL RB3

    4a. Light_Function_C_13: change the value to “Fernlicht rechts” (Right High Beam) [Standard: “Not active”]4b. Dimming_CD_13:change the value to “100” [Standard: “0”]4c. Light_Function_D_13: change the value to “Lichthupe” [Standard: “Not active”]4d. Dimming_Direction_CD_13: change the value to “Maximize”
    2)
    Fog lights off with reverse gear engaged [FUNCTIONING]
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Static AFS light
    4. Bei_rueckwaertsfahrt: change the value to "Off" [Standard: "both sides"]

    3)
    Coming Home [WORKING]
    Enable the CH function on the infotainment display. The low beam lights (or fog lights) and position lights come on when you get out of the car. Adjust the duration on the infotainment display.
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. auBenlicht_uebergreifend

    3a. Menuesteuerung Coming Home Werkseinstellung: change the value to "active"
    3b. Coming Home Verbaustatus: change the value to "automatic" [Standard: "Not present"]

    [Optional] Determines which lights are turned on
    4. "Coming Home Leuchten"

    to. Change the value to "low beam" for low beam
    b. Change the value on "fog" for fog lights
    c. Change the value to "not active" to deactivate.

    4)
    Leaving Home [WORKING]
    Enable the LH function on the infotainment display. The low beam and position lights come on when the machine is opened. Adjust the duration on the infotainment display.
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. auBenlicht_uebergreifend
    4. Leaving-Home_Verbausstatus: change the value to "Enabled" [Standard: "Not enabled"]
    5. lho_aktiviert: change the value to "Active" [Standard: "not active"]

    5)
    Coming / Leaving Home with third brake light [WORKING]
    Add the third brake light to the CH / LH function
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Leuchte22BR MC9
    4. Light_Function_B_22: change the value to "ComingHome LeavingHome" [Standard: "nicht aktiv"]

    6)
    Cornering Lights [WORKING]

    Enable the "Cornering" function on cars equipped with the "Full LED Pack"
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Leuchte12NL LB40
    3a. Light_Function_B_12: change the value on "Abbiegelicht links" [Standard: "not active"]
    4. Leuchte13NL RB3
    4a. Light_Function_B_13: change the value to "Abbiegelicht rechts" [Standard: "not active"]
    5. Static AFS light
    5a. Vorschrift: change the value to "FMVSS_517_108" [Standard: "Off" or "ECE R119"]
    [Optional] Disable the Cornering function at a given speed.
    5b. Obere_Geschwindigkeitsschwelle: change the value to the desired speed.
    7)

    Front daytime running lights off with the handbrake on [FUNCTIONING]
    It allows the parking lights to be switched off when the hand brake is applied.
    NOTE: Incompatible with "Daylight ON / OFF menu"

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Außenlicht_Front
    4. Tagfahrlicht_Dauerfahrlicht_bei_Handbremse_abschalten: change the value to "active" [Standard: "not active"]

    8)
    Daylight lights off with knob set to 0 [WORKING]
    (Follow the code up to point 3a to switch off only the front DRLs and leave the rear ones on)

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Außenlicht_Front (Front)

    3a. Tagfahrlicht_nur_in_Schalterstellung_AUTO: change the value to "active" [Standard: "not active"]

    4. Leuchte23SL HLC7 (Rear Left By Ghost45)


    4a. Light_Function_A_23: change the value in "Parklicht links" [Standard: "nicht_definiert_28"]
    4b. Light_Function_B_23: change the value to "Standlicht" [Standard: "Parklicht links"]

    5.Leuchte24SL HRA69 (Rear Right by Ghost45)


    5a. Light_Function_A_24: change the value to "Parklicht Rechts" [Standard: "nicht_definiert_28"]
    5b. Light_Function_B_24: change the value to "Standlicht" [Standard: "Parklicht links"]

    9)
    Daytime running lights with selection (flag) ON / OFF radio menu [WORKING]
    Adds a new item in the menu that allows you to turn on / off the DRLs, instrument panel, license plate lights and climate control lights. Vehicle settings> Lights> Daytime running lights
    (Follow the code up to point 3a to switch off only the front DRLs and leave the rear ones on)
    NOTE: Incompatible with "Daytime running lights off with handbrake on", otherwise the DRLs do not light up from the menu.

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Außenlicht_Front (Front)

    3a. Tagfahrlicht_Aktivierung_durch_BAP_oder_Bedienfolge_moeglich: change the value to "active" [Standard: "not active"]
    3b. Tagfahrlicht_Dauerfahrlicht_aktiviert_Zusaetzlich_Standlicht: change the value to "active" [Standard: "not active"]

    4. Leuchte23SL HLC7 (Rear Left by Ghost45)

    4a. Light_Function_A_23: change the value in "Parklicht links" [Standard: "nicht_definiert_28"]
    4b. Light_Function_B_23: change the value to "Standlicht" [Standard: "Parklicht links"]

    5.Leuchte24SL HRA69 (Rear Right by Ghost45 )

    5a. Light_Function_A_24: change the value to "Parklicht Rechts" [Standard: "nicht_definiert_28"]
    5b. Light_Function_B_24: change the value to "Standlicht" [Standard: "Parklicht links"]

     
    #2 Ghost45, Aug 10, 2019
    Last edited: Oct 6, 2019
    Aroza, Jimbobcook and Twix like this.
  3. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    10)
    Daytime running lights intensity with knob in position lights and parking function [WORKING]
    NOTE: If the intensity of the rear lights does not change, enter the same value as the code "Daytime running lights in Coming / Leaving Home" of the right-hand rear light (by Ghost45 ).

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Leuchte3SL VRB36 (Front Left)
    3a. Dimming_AB_3: change the value to the desired value (0 to 127) [Standard: "38"]

    4. Leuchte2SL VLB22 (Front Right)
    4a. Dimming_AB_2: change the value to the desired value (0 to 127) [Standard: "38"]

    5. Leuchte23SL HLC7 (Rear Left)
    5a. Dimming_AB_23: change the value to the desired value (0 to 127) [Standard: "127"]

    6. Leuchte24SL HRA69 (Rear Right)
    6a. Dimming_AB_24: change the value to the desired value (0 to 127) [Standard: "127"]

    11)
    Daytime running lights intensity from Radio menu selection (flag)
    [WORKING] (by Ghost45 )
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Leuchte3SL VRB36 (Left Light)
    3a. Dimming_CD_3: change the value to the desired one (0 to 127) [Standard: "100"]

    4. Leuchte2SL VLB22 (Right Light)
    4a. Dimming_CD_2: change the value to the desired one (0 to 127) [Standard: "100"]

    12)
    Daytime running lights intensity in Coming / Leaving Home [WORKING] (by Ghost45 )
    NOTE: If the intensity does not change, enter the same value as the "Daytime running lights intensity with knob in position lights and parking function" code of the right-hand rear light.

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Leuchte23SL HLC7 (Left Light)
    3a. Dimming_CD_23: change the value to the desired one (0 to 127) [Standard: "127"]

    4. Leuchte24SL HRA69 (Right Light)
    4a. Dimming_CD_24: change the value to the desired one (0 to 127) [Standard: "127"]

    13)
    Reversing light intensity [NOT TESTED]

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Leuchte29 KL30G A69
    3a. Dimming_AB_29: change the value to the desired one [Max. 127]

    4. Leuchte28RFL C3
    4a. Dimming_AB_28: change the value to the desired one [Max. 127]

    14)
    Number of comfort arrows intermittent [WORKING]

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Außenlicht_Blinker
    4. Komfortblinken Blinkzyklen: change the value to the desired value (Max. 5) [Standard: 3]
    5. Reset "Lights" to factory settings on the infotainment display.
     
    #3 Ghost45, Aug 10, 2019
    Last edited: Aug 10, 2019
    Twix, Aroza and Jimbobcook like this.
  4. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    15)
    Light sensor sensitivity
    [NOT TESTED]
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Assistance light function
    4. Lichtsensorempfindlichkeit: change the value to:

    to. "Normal" [Standard]
    b. "Sensitive"
    c. "Non-sensitive"

    SOUNDS AND NOTICES

    16)

    Seat belt warning [WORKING]
    Allow to turn off or change the sound of seat belts
    1. Control Unit 17 (Dash Board)
    2. Long Coding
    3. Seat belt warning: change the value to:

    to. "Version 1" [Standard]
    b. "Off"
    c. "Version 2"

    17)
    OEM alarm (Horn) [WORKING]
    Enables the standard alarm that makes the horn sound, for those who did not purchase the volumetric burglar alarm with an audible alarm, proposed as an option, during the purchase phase. NOTE: with this code the automatic closing of the mirrors when the vehicle is closed will be disabled

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Diebstahlschutz

    3a. anti_theft_alarm_system: change the value to "Active" [Standard: "not active"]
    3b. Akustischer_Alarm_Signalhorn: change the value to "Active" [Standard: "not active"]
    3c. DWA_Alarmverzoegerung: change the value to "delay_driver_door_contact_thatcham" [Standard: "delay_driver_door_lock_cylinder_skoda"]
    3d. Diebstahlschutz_mit_Anhaenger: change the value to "Active" [Standard: "not active"]

    18)
    Auto open / close acoustic confirmation [WORKING]
    Enable a confirmation sound when the machine is opened / closed. If the volumetric anti-theft device is installed, a bit is emitted otherwise the horn is used (Management menu available in the infotainment display in: Press the machine symbol> Setup> Opening and Closing)
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Acknowledgment Signals

    3a. Menuesteuerung_akustische_Rueckmeldung: change the value to "Active" [Standard: "Not active"]
    3b. Akustische_Rueckmeldung_entriegeln: change the value to "Active" [Standard: "Not active"]
    3c. Akustische_Rueckmeldung_verriegeln: change the value to "Active" [Standard: "Not active"]


    19)
    Disable motor warning with door open [NOT TESTED]

    1. Control Unit 17 (Dashboard)
    2. Adaptation
    3. Ignition active message, actuator: change the value to:

    to. Driver door (Standard)
    b. "All doors"
    c. "No display"


    20)
    Ice warning and temperature [WORKING]

    1. Control Unit 17 (Dashboard) - Code 47115
    2. Adaptation
    3. outside_temperature

    3a. p_ice_warning_exit_temperature: change the value to the desired one [Standard: "6 ° C"] (Temperature that makes the ice symbol and the acoustic beep disappear)
    3b. p_ice_warning_entry_temperature: change the value to the desired one [Standard: "4 ° C"] (Temperature that makes the ice symbol appear and emits the beep)
     
    #4 Ghost45, Aug 10, 2019
    Last edited: Aug 10, 2019
    Twix, Aroza and Jimbobcook like this.
  5. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    MULTIMEDIA

    21)
    Hide option AM Radio [WORKING]

    1. Control Unit 5F (Information Control Unit)
    2. Long Coding
    3. byte_14_AM_disabler: change the value to "activated" [Standard: "not_activated"]

    22)
    Change volume AM / FM / DAB radio, DVD, SD player, etc. [WORKING
    ]
    1. Control Unit 5F (Information Control Unit)
    2. Adaptation
    3. Audio Management Input Gain Generation 2: change the following values to those desired [Standard: "-128"]

    to. Radio (FM)
    b. Radio (AM)
    c. Digital radio (DAB)
    d. Media_MFP (SD reader)


    23)
    Change Skin Infotaiment [WORKING]

    1. Control Unit 5F (Information Control Unit)
    2. Long Coding
    3. Byte_17_Skinning: change the value to:

    to. "Skin_2": Carbon Theme
    b. Other skins to test

    4. Press and hold the power button for 10 seconds until restarting
    (attention please after this mod seems the radio will be slowly..so check in your car if is ok it must be evaluated by each of you)

    24)
    Change initial logo Infotaiment [WORKING]

    To see every screen I report to this video on YT:

    1. Control Unit 5F (Information Control Unit)
    2. Long Coding
    3. Byte_18_Screenings: change the value to:

    to. "0": SEAT Standard
    b. "1": SEAT FR
    c. "2": SEAT Cupra
    d. "3": SEAT Ecomotive
    is. "5": SEAT Experience
    f. "6": SEAT FR Line

    4. Press and hold the power button for 10 seconds until restarting

    25)
    Adjust microphone sensitivity [Working]

    1. Control Unit 5F (Information Control Unit)
    2. Adaptation
    3. Microphone Sensitivity: change the value to the desired one [Standard: "0 db"]

    26)
    Park Pilot (Optical Parking System) [WORKING]

    1. Control Unit 76 (Parking Assistance)
    2. Long Coding
    3. Visual display for park assist: change the value in "OPS display" [Standard: "not installed"]

    27)
    Disable CD / DVD eject button [NOT TESTED]

    1. Control Unit 5F (Information Control Unit)
    2. Adaptation
    3. CD eject button: change the value to "Disabled" [Standard: "Enabled"]

    28)
    Offroad Menu [WORKING]

    Adds the Offroad menu (Wheel angle, oil temperature, etc.). It works even if you don't have the navigator, with some limitations. Touch the machine symbol> Visual> Offroad. In the absence of the standard navigator, the app will report an error as it cannot find components related to the navigator.
    1. Control Unit 5F (Information Control Unit)
    2. Adaptation
    3. Car_Function_Adaptations_Gen2

    3a. menu_display_compass: change the value to "activated" [Standard: "Not activated"]
    3b. menu_display_compass_over_therhold_high: change the value to "activated" [Standard: "Not activated"]
    3c. menu_display_angle_of_slope: change the value to "activated" [Standard: "Not activated"]
    3d. menu_display_angle_of_slope_over_threshold_high: change the value to "activated" [Standard: "Not activated"]

    4. Car_Function_List_Bap_Gen2

    4a. compass_0x15: change the value to "activated" [Standard: "Not activated"]
    4b. compass_0x15_msg_bus: change the value to "Comfort data bus"
    4c. angle_of_slope_0x24: change the value to "activated" [Standard: "Not activated"]
    4d. angle_of_slope_0x24_msg_bus: change the value on "Comfort data bus"

    5. Long Coding

    5a. byte_24_Navigation_System: change the value to "activated" [Standard: "Not activated"]
     
    #5 Ghost45, Aug 10, 2019
    Last edited: Aug 10, 2019
    Twix, Aroza and Jimbobcook like this.
  6. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    INSTRUMENT PANEL

    29)
    Virtual Cockpit Sport [NOT WORKING]

    1. Control Unit 17 (Dashboard)
    2. Adaptation
    3. Sport
    4. Change the value to "Display" [Standard: "Don't Display"]

    30)
    Stopwatch [WORKING
    ]
    Enable the stopwatch in the instrument panel. It also works with the Virtual Cockpit.
    1. Control Unit 17 (Dashboard)
    2. Long Coding
    3. Lap Counter: change the value to "Yes" [Standard: "No"]
    Alternative:
    3. Byte 1
    4. Enable Bit 3

    31)
    Hand test at startup [WORKING]

    Only works with the analogue tachometer.
    1. Control Unit 17 (Dashboard)
    2. Long coding
    3. Staging: change the value to "Yes" [Standard: "No"]
    Alternative:
    3. Byte 1
    4. Enable Bit 0

    32)
    Backlight for day / night instrument panel (display and hands) [WORKING]

    1. Control Unit 17 (Dashboard)
    2. Adaptation
    3. dimming_characteristic_curve_adjustment_clock_dial _day (Day)

    Y1: change the value to "3" (Maximum) [Standard: "0"]
    Y2: change the value to "5" (High) [Standard: "0"]
    Y3: change the value to "8" (Average) [Standard: "0"]
    Y4: change the value to "8" (Low) [Standard: "5"]

    4. dimming_characteristic_curve_adjustment_clock_dial_night (Night)

    Y1: change the value to "5" (Maximum) [Standard: "2"]
    Y2: change the value to "6" (High) [Standard: "2"]
    Y3: change the value to "E" (Average) [Standard: "0E"]
    Y4: change the value to "1E" (Low) [Standard: "1E"]


    33)
    Missing tank liters [WORKING]

    The same coding can be obtained by spending 10 credits
    1. Control Unit 17 (Dashboard)
    2. Long Coding
    3. Byte 10
    4. Enable Bit 4

    34)
    Compass at the bottom [NOT TESTED]

    Move the compass icon to the same temperature level.
    1. Control Unit 17 (Dashboard)
    2. Long Coding
    3. Byte 09
    4. Enable Bit 3 and 6

    OTHER

    35)
    Disable Start / Stop [WORKING]

    1. Control Unit 19 (Gateway)
    2. Adaptation
    3. Start / stop start voltage limit: change the value to "12V" [Standard: "7.6V"]

    36)
    Fan speed in automatic mode (Climatronic bi zone) [WORKING]

    1. Control Unit 08 (Air Condition)
    2. Long Coding
    3. Blower display in auto operation: change the value to "Activated" [Standard: "Not activated"]

    37)
    Mirror closing 1 click [NOT TESTED]

    It allows the mirrors to be closed without holding down the machine closing button, for cars equipped with electric mirrors.
    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. Spiegelverstellung
    4. Funk_Spiegelanklappung_Modus: change the value to "by_look_command_via_remote_control_key" [Standard: "by_convenience_operation_via_remote_control_key"]

    38)
    Accelerator response [WORKING]

    1. Control Unit 44 (Steering Assistance) Code: 19249
    2. Adaptation
    3. Driving profile switchover:

    to. "Incremental, controlled over time" (Standard)
    b. "Direct, controlled over threshold"


    39)
    Steering response [WORKING]

    1. Control Unit 44 (Steering Assistance) Code: 19249
    2. Adaptation
    3. Characteristic curve of steering assistance:

    to. "Driving profile selection button" (Standard)
    b. "Comfort"
    c. "Automatic"
    d. "Dynamic"
    is. "Default"


    40)
    Switch-on driving profile [NOT WORKING]

    1. Control Unit 19 (Gateway)
    2. Extended Coding
    3. Byte 8 (E8)
    4. Activate Bit 4
    (After this change, Byte 8 will change from "E8" to "F8")

    41)
    Battery [NOT TESTED]

    Useful to change the values if the standard battery is changed.
    1. Control Unit 19 (Gateway)
    2. Adaptation
    3. Battery Adaption
    4. Change the values to those indicated on the new battery. (Ah, Manufacturer, Serial Numer and Technology)

    42)
    Hill Start Assist Sensitivity [hill start car] [NOT TESTED]

    1. Control Unit 03 (Brake)
    2. Adaptation
    3. Hill-start assistant
    4. Hill-start assistant: change the value to:

    to. "Normal" [Standard]
    b. "Early"
    c. "Late"
     
    #6 Ghost45, Aug 10, 2019
    Last edited: Sep 8, 2019
  7. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    43)
    Hill Start Assist inclination [Hill start car](NOT TESTED)
    Modification when to make the assistant intervene uphill by changing the angle of inclination. Too high a percentage will turn off HSA because too high gradients will never be reached.

    1. Control Unit 03 (Brake)
    2. Adaptation
    3. Hill-start assistant, increase threshold
    4. Steigungsschwelle Motor laüft: change the value to the desired one [Standard: "3%"]

    44)
    Rear trunk closure delay [WORKING]
    It delays the closing of the boot if it is opened with the remote control and then closed, useful if you forget the keys inside.

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. ZV Heck
    4. Freigabenachlauf_Heck_nach_Einzeloeffnung_ueber HDF-Funktaster: change the value to "active" [Standard: ???]

    45)
    Deflector mode roof (opening by remote control) [WORKING]

    1. Control Unit CA (Sunroof)
    2. Adaptation
    3. Komfortfunktionen
    4. Target position for comfort opening: change the value to "Tilt out position" [Standard: "Slid position"]

    46)
    Switch off parking sensors at a given speed [NOT WORKING]

    1. Control Unit 76 (Parking Assistance)
    2. Adaptation
    3. Switch-off speed for parking assist: change the value to 10 [Standard: 15km / h]

    47)
    Operate the remote control keys even when the machine is turned on [OPERATING]

    1. Control Unit 09 (Central Electrics)
    2. Adaptation
    3. ZV allgemein
    4. Funk bei Klemme 15 ein: change the value to "Active" [Standard: "Not active"]

    48)
    ESC Mode [NOT TESTED]

    Select ESC ON, SPORT or OFF in the infotainment menu
    1. Control Unit 09 (Central Electrics)
    2. Long coding
    3. Byte 29
    4. Activate Bit 06



    LIGHTS ERRORS


    FRONT LIGHTS
    1. Control Unit 09 (Central Electrics)
    2. Adaptation

    Diurnal and High Beam: [NOT TESTED]

    3. Leuchte4TFL LB43 (Diurna Sx)
    3a. Lasttyp: change the value in "LED Abblendlicht" [Standard: "???"]

    4. Leuchte5 TFL RB6 (Diurnal Right)
    4a. Lasttyp: change the value in "LED Abblendlicht" [Standard: "???"]

    5. Leuchte8FL LB39 (Glare Left)
    5a. Lasttyp: change the value in "LED Abblendlicht" [Standard: "???"]

    6. Leuchte9FL LB39 (Dazzling Right)
    6a. Lasttyp: change the value in "LED Abblendlicht" [Standard: "???"]


    Fog lights: [NOT TESTED]

    3. Leuchte12NL LB40 (Left Fog Light)
    3a. Lasttyp: change the value in "LED Lichtmodul10" [Standard: "10 - allgemeine Scheinwerfer"]

    4. Leuchte13NL RB3 (Fog Lamp Right)
    4a. Lasttyp: change the value in "LED Lichtmodul10" [Standard: "10 - allgemeine Scheinwerfer"]

    5. Brightness (Optional): Dimmerwert_AB_13: change the value to the desired value Max: "127" [Standard: "100"]

    Arrows: [NOT TESTED]

    3. Leuchte 0 BLK VL B35 (Left Arrow)
    3a. Lasttyp: change the value to "allgemeine LED" [Standard: "???"]

    3. Leuchte1BLK VRB23 (Arrow Right)
    3a. Lasttyp: change the value to "allgemeine LED" [Standard: "???"]



    REAR LIGHTS
    1. Control Unit 09 (Central Electrics)
    2. Adaptation

    Reverse: [WORKING]

    3. Leuchte28RFL C3

    3a. Type_of_load_28: change the value in "LEDBlinkleuchten" [Standard: "Allemeine Gluehlampe27w Auch15TFL"]

    4. Brightness (Optional): Dimmerwert_AB_13: change the value to the desired value Max: "127" [Standard: "100"]

    Rear arrows: [WORKING]

    3. Leuchte18BLK HLA71 (Left Arrow)

    3a. Type_Of_Load_18: change the value in "LEDBlinkleuchten" [Standard: "Blinkleuchten"]

    4. Leuchte19BLK HRC8 (Arrow Right)

    4a. Type_Of_Load_18: change the value in "LEDBlinkleuchten" [Standard: "Blinkleuchten"]

    5. Brightness (Optional): Dimmerwert_AB_13: change the value to the desired value Max: "127" [Standard: "100"]

    Plate: [WORKING]

    3. Leuchte25KZL HA60
    4. Type_Of_Load_25: change the value to "2 * 3W" (not running in all cars)
    or
    "allgemeineLEDmitOpenLoadDiagnose" ( running in all cars)
     
    #7 Ghost45, Aug 10, 2019
    Last edited: Sep 8, 2019
    Twix, Aroza, Jimbobcook and 1 other person like this.
  8. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    Others Encodings

    49)
    Install OEM Camera [Working]

    1 - Module 5F
    2 - Long Coding
    3 - Up in the right 2° page
    4 - Byte 19
    Activate (flag) bit 4

    50)
    Operate the remote control buttons even when the machine is on
    It can be useful to open only the trunk without also opening the doors by the command on the door.
    If you have the Keyless system you can get out of the car and close it.[Working]

    Module 09 (Central Electrics) [
    Security access -> 31347
    Adaptation
    Submenu - ZV allgemein
    - Funk bei Klemme 15 ein -> active

    New encodings found !

    51)
    Automatic closing of the windows upon locking (one click of the remote control):

    Central Electric 09
    Adaptations
    1) Zv comfort
    Komfortschliessen Brasilien ---> active
    Bap Komfortschlieben--->active
    [​IMG]


    52)
    Motorized car mirrors [Working]

    Central Electrics 09
    Adaptations
    Spiegelverstellung

    Automatic closing of the mirrors when the car is closed [Working]
    Spiegelverstellung
    Funk_Spiegelanklappung_Modus: cambiare il valore su "by_look_command_via_remote_control_key" [Standard: "by_convenience_operation_via_remote_control_key"]
    Menuesteverung funk spiegel anklappen--->active
    Spiegelanklappen bei Wiederverriegelung -->active
    Enter the variants: [Working]
    1) Spiegelanklappung geschwindigkeitsabhaengig ---->moving mirrors folding function
    2) Spiegel ausklappen ueber ffb auf ---->mirror folding function with only panel inserted

    Lowering mirrors in reverse [Not Working Actually]

    Menue Spiegel absenkung ----> Active
    Spiegelabsenkung bei rüeckwäertsfahrt----> Active

    [​IMG]

    :footysup:
     
    #8 Ghost45, Aug 10, 2019
    Last edited: Feb 14, 2020
    Twix, IbizaSRB, Aroza and 2 others like this.
  9. убийца Драконов

    Joined:
    May 4, 2019
    Messages:
    105
    Likes Received:
    9
    Great post, keep it up
     
    IbizaSRB and Ghost45 like this.
  10. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    Thanks for your like!!!
    :drive2:
     
  11. vc-10

    vc-10 Active Member

    Joined:
    Mar 29, 2016
    Messages:
    203
    Likes Received:
    69
    What does the 'sport' display on the digital dash look like?
     
  12. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    You must consider that these codes are for more cars... Probably in this car is not soprt but dynamic.
    I do not have virtual cockpit this code is tested so is ok... but you must see if this 'parameter' is come out... Inside.
     
    #12 Ghost45, Aug 12, 2019
    Last edited: Aug 12, 2019
    IbizaSRB likes this.
  13. Aroza

    Aroza Active Member

    Joined:
    Feb 27, 2018
    Messages:
    10
    Likes Received:
    3
    First of all, thank you very much for sharing all this usefull information!

    About the OEM alarm tweek.
    How can I test it, to see if it works?
     
  14. Aroza

    Aroza Active Member

    Joined:
    Feb 27, 2018
    Messages:
    10
    Likes Received:
    3
    I also tried the off road menu
    At first it seemed to be working but very quickly it started freezing up until the screen was blank.
    See the pictures below. First_edited.jpg

    Later_edited.jpg
     
  15. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    Hi Aroza,
    Yes i have seen this rallenty in my ibiza too.
    But i do not change the color to green.. So try probably to turn back to red color and reset... With turn off the button of the radio for few seconds and see if the rallenty is on again...
     
    Aroza likes this.
  16. Aroza

    Aroza Active Member

    Joined:
    Feb 27, 2018
    Messages:
    10
    Likes Received:
    3
    I own an Arona myself.
    I didn't change the color to green!
    And what does "rallenty" mean exactly? :)
    I was thinking of reseting, but I dindn't want to lose all the radio stations. But I will try it...
    Thanks again!
    Mille grazie!!
     
  17. Ghost45

    Ghost45 Active Member

    Joined:
    Aug 9, 2019
    Messages:
    65
    Likes Received:
    38
    @Aroza,
    ohh yes probably the Arona have the green menu' insteat of red in our ibiza!
    I mean slowdown in several menu' like the black fiber i have seen this slowdown...i don't know how!!!
    About the reset is to apply the modify after coding....but not will do any delete of radio station!
     
    Aroza likes this.
  18. at0ny

    at0ny Active Member

    Joined:
    Sep 3, 2018
    Messages:
    124
    Likes Received:
    23
    Sport mode tested on 4 cars with VC in Holland. None of the ibiza's (2018/2019 and arona(2019) Worked. Only worked on the leon 5F facelift with VC...
    [​IMG]

    Verstuurd vanaf mijn SM-G965F met Tapatalk
     
  19. Aroza

    Aroza Active Member

    Joined:
    Feb 27, 2018
    Messages:
    10
    Likes Received:
    3
    Now_edited.jpg
    This is what it looks like now.

    About the question I asked you regarding the OEM alarm tweek.
    How did you test it, to see if it works?
     
  20. Not sure if this has changed but on the prefacelift cars if you turned on the alarm there are no internal sensors so all it checks are

    DOORS, BONNET AND BOOT,

    Thus you sit in the car and use the key to lock the car, wait for 30 seconds and then open the door from inside using the handle.
    Or open the bonnet (which is not possible on the Leon) again after the 30 seconds
     
    IbizaSRB and Aroza like this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice