Dismiss Notice
Hi Guest, stickers are available from our online store.

OBDeleven modifications

Discussion in 'Leon Mk3 (2012-2020)' started by bretth1974, Sep 10, 2016.

  1. Rbaut

    Joined:
    Apr 4, 2019
    Messages:
    8
    Likes Received:
    1
    Hi guys, I've done a few bits but really want to find a way to change (increase) the brightness of my side lights - so their brightness matches the DRL. I've not had any luck from the searching I've done, albeit a frantic scan through some pages.

    Does anyone know if this is possible and able to point me in the right direction - pre face-lift (15 plate)?
     
  2. Damo H

    Damo H That Carbon sknob down the street ;)

    Joined:
    Oct 3, 2012
    Messages:
    3,222
    Likes Received:
    1,896
    Probably is possible, but if it’s a pre facelift, you’d need to check the DRL still turns off when indicating

    Also having seen a few Leons driving in the dark without their lights on (not sure how as their dash should warn them) the DRLs are too bright for other road users. So expect to be flashed.
     
    Rob66 likes this.
  3. Wastedagen

    Wastedagen Active Member

    Joined:
    Aug 3, 2017
    Messages:
    400
    Likes Received:
    75
    That would be a nice to have. Mine doesn't warm me of that or warm me if I've left my fog lights on. Which a few people seem to have. I'm guessing you need a certain spec model?
     
  4. Wastedagen

    Wastedagen Active Member

    Joined:
    Aug 3, 2017
    Messages:
    400
    Likes Received:
    75
    ..... Or even warn me....
     
  5. kevster184

    kevster184 Active Member

    Joined:
    Mar 14, 2015
    Messages:
    645
    Likes Received:
    22
    I have a '15 plate Leon FR, having issues with one or both wing mirrors not folding. Could well be an electronic issue.

    Is ODB11 any good for diagnosing this, ie showing switch/motor fault etc?
     
  6. ghostbustertab

    ghostbustertab Active Member

    Joined:
    Jun 21, 2016
    Messages:
    260
    Likes Received:
    20
    Hi all I've changed my door lights to flash when I indicate ( red and white) but miss the solid colours when in cupra mode how do I change them back to that.
    I did a back up but must of been after my made the adjustment.
    Please help anyone
     
  7. WavyDavey

    Joined:
    May 3, 2019
    Messages:
    11
    Likes Received:
    1
    Hi,
    I have the same Reg/ model as yourself and found OBD11 quite useful.
    Had an issue recently with my mirrors not folding on lock. Mine needed the windows reset
    (Holding switch up for each in turn) see some other posts on that...
    The app said it was an inactive alarm fault.
    I’ve used it for a few mods ie 1 click mirror fold rear DRL’s etc.
    It even told me I had an intermittent fault with footwell light, which I can see now and then at night, so I’d say it’s worth your while.
     
  8. Ninja10R

    Ninja10R Active Member

    Joined:
    Dec 20, 2010
    Messages:
    171
    Likes Received:
    20
    So, i did make the change to have the door lights in red in all modes. Is there anyone that knows how option 1 in this Youtube video can be achieved (red/white lights in all modes except sport where they are only red) ?

     
  9. DaRa

    DaRa Active Member

    Joined:
    Nov 21, 2019
    Messages:
    24
    Likes Received:
    5
    Hello everybody,
    I tried to read as much as I could in the 84 pages :)
    I did purchase an ODB11 adapter on amazon, and downloaded EODB-Facile, Auto Doctor, ODB2 Expert and ODB Plus on my iOS
    I managed to connect most of those apps to my car via the ODB in WiFi. Now I can read some information but can't find the parameters you guys are discussing.
    Do I have to just enter them in the command line interface option ?
    Any help would be greatly appreciated
    Cheers
     
  10. Walone

    Walone Active Member

    Joined:
    Feb 10, 2016
    Messages:
    732
    Likes Received:
    126
    OBD11 is different to OBDeleven which only works on Android at the moment.
     
  11. SteveGSXR600K1

    SteveGSXR600K1 Active Member

    Joined:
    May 6, 2017
    Messages:
    208
    Likes Received:
    45
    I've got a 2016 184FR Technology, so it's got all the LED DRL's, auto lights, etc, and a MIB2 head unit. In the OBDeleven Apps there's one that I wanted to active called 'DRL settings in head unit'. When I go into it, it says that it's 'Not supported'. My friend has the same car but a 2015 with the MIB1, and it works fine. Is it worth doing it manually through the adaptations with the following:

    On or Off daytime running lights (DRL) from the screen
    This modification will add a new option in the menu of lights that allow us to activate or deactivate the daytime running lights (DRL) from the screen.
    1 - Module 09 - Electronic. Code (31347)
    2 - Adaptation
    3 - Select - Daytime Running Light
    4 - Sub - Tagfahrlichtnur Aktivierung oder durch BAP Bedienfolge moeglich
    5 - Change value to ON

    Didn't fancy just trying it in-case it buggers something up!
     
  12. C_ED_99

    C_ED_99 Active Member

    Joined:
    Jan 27, 2010
    Messages:
    190
    Likes Received:
    11
    Anybody got the new version of OBDeleven yet?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice