Original Airbox/engine cover for 2.0TFSI BWA

[Philip Santi]

Hi All

I'm looking for an original Airbox/engine cover for a 2.0 TFSI engine with code BWA - needs to be in good condition without damage - part number 06F133837AA and preferably with with the original turbo inlet hose pipe.

Let me know what you have

Thanks

 

[Kenan]

Iv got one from a MK2 Leon Cupra

Sent from my Redmi Note 7 using Tapatalk

 

[Philip Santi]

Iv got one from a MK2 Leon Cupra

Sent from my Redmi Note 7 using Tapatalk

What model year or engine code (ie BWA)? Does it have any damage?

Cheers

 

[Cupra_Chris]

I've got one laying around from an 08 FR? I bought it as a spare but doubt I'll use it, no turbo inlet hose

 

[Cupra_Chris]

The plaque is a bit damaged as you can see in the pics but other wise it's in good condition, might have an air filter in there too

 

[Philip Santi]

The plaque is a bit damaged as you can see in the pics but other wise it's in good condition, might have an air filter in there too

Sorry, just got back from holiday and seen this. How is the plaque damaged? I have to admit, I didn't know it would come off (or is that the issue, ie it won't stay on properly now)?

Cheers

 

[Cupra_Chris]

Sorry, just got back from holiday and seen this. How is the plaque damaged? I have to admit, I didn't know it would come off (or is that the issue, ie it won't stay on properly now)?

Cheers

No worries, I think the plaque does stay on. They are designed to be removed as they have clips on them. Will have to have a look next time I'm near it.

 

[Philip Santi]

No worries, I think the plaque does stay on. They are designed to be removed as they have clips on them. Will have to have a look next time I'm near it.

Great - I'm in no great rush and still slightly undecided if to just bite the bullet and get an induction kit, but let me know when you've had a look

 

[Cupra_Chris]

Great - I'm in no great rush and still slightly undecided if to just bite the bullet and get an induction kit, but let me know when you've had a look

I'll have a look this morning, even if you get an induction kit you should use a cover (just make some cuts in it) as our bonnets have a tendancy to leak water into the engine. Ultimately its up to you as some have got away with it

 

[Cupra_Chris]

Bottom left of the plaque doesn't connect to the cover due to a missing clip, otherwise it holds on fine everywhere else.

 

[Philip Santi]

Thanks for taking to time to look - I'm moving towards buying an induction kit and cutting my damaged one

 

[Cupra_Chris]

No worries, I did the same as it made the most sense