Oooo... fits MK2 and MK3... @paddy6789 you getting these? I've never really understood if I need them or not.
You always need them...
...always
Was about to say what you put."Why do I need these? The factory drop links are just a bar that attaches the front anti roll bar ends up to the front damper. The OEM links were made the length they are for a reason - to compliment the standard ride height. But when you lower ride height, the car will now be pulling your anti roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle."
All I can think now is ... oh no, my anti roll bar is being pulled up!!
Was about to say what you put.
Depends how low you go, and whether they catch other parts. But when lowered your anti roll bar is not working 100%
LOL @paddy6789 will buy them as they have a RacingLine logo on them, even though he doesn't need them as his car isn't low enough.I just copied it from Racinglines sales material. Oh no, why did you have to tell me that!!??
. I thought exactly that!LOL @paddy6789 will buy them as they have a RacingLine logo on them, even though he doesn't need them as his car isn't low enough.
That dont even make sense to me lol.It depends on if the ARB curved ends end up touching the drive shafts normally, nothing more as the ARB is free to move, it is only there to apply a downward load on to the other side of the car, it can not apply an upward load.
Apologies for the crude drawing. But as you lower the car the angle of the anti roll bar gets pushed further down. If you lower to much it has chance to fowl the drive shaft (in purple) so you need to fit shorter drop links to straighten the angle of the anti roll bar:That dont even make sense to me lol.
Sent from my SM-G950F using Tapatalk
So shall I look at the clearance between the anti-roll bar and drive shaft to make sure it's ok?Apologies for the crude drawing. But as you lower the car the angle of the anti roll bar gets pushed further down. If you lower to much it has chance to fowl the drive shaft (in purple) so you need to fit shorter drop links to straighten the angle of the anti roll bar:
View attachment 12831