1. Hi Guest. We've recently updated our forum rules. Please take some time to review them. You can read the new rules here
    Dismiss Notice
Dismiss Notice
Hi Guest, stickers are available from our online store.

Tarraco Net Partiion

Discussion in 'Horton SEAT - Parts Sponsor' started by Tony Tonic, Jun 13, 2019.

  1. Tony Tonic

    Tony Tonic Active Member

    Joined:
    Jan 30, 2019
    Messages:
    160
    Likes Received:
    23
    @HortonSEAT in the Tarraco owners manual on page 167 it mentions a Net Partition. Is this actually orderable in the UK? CAn you find out form SEAT? I imagine you will have a lot of orders if yes!!!

    Net partition*
    Deploy and fold the net partition
    Fig. 166 Deploying the net partition.
    Fig. 167 Folding in the net partition.
    Before fitting the net partition in the vehicle it
    must be unfolde
    Fold out the net partition
    Take out the partition net from the corresponding
    bag and unroll it.
    Extend the cross rods ››› Fig. 166 1 and 2
    of the net in the direction of the arrows until it
    “clicks”.
    Folding in the net partition
    ● Press on the release button ››› Fig. 167 1
    and bend the cross rod in the direction of the
    arrow with the button pressed.
    ● Press on the release button ››› Fig. 167 2
    and bend the cross rod in the direction of the
    arrow with the button pressed.
    ● Fold in the net partition and store it in its
    bag.
    ● Store the net partition safely in the vehicle.
    Using the net partition
    Fig. 168 Net partition fitted.
    The purpose of the net partition is to prevent
    the items in the boot to move into the cabin,
    e.g. in the event of sudden braking.
    Fitting the net partition
    The partition net can be fitted behind the rear
    seat or, depending on the features, behind
    the front seats with the second row of seats
    lowered.
    ● If required, remove the rear shelf
    ››› page 159.
    ● Folding out the net partition ››› page 167.
    ● Secure the net partition in the left housing
    of the roof ››› Fig. 168 A . Make sure to move
    the cross rod down beyond the upper position.
    ● Hook in the net partition on the rear righthand
    side roof housing by pressing on the rod
    ››› Fig. 168 A .
    ● Secure two hooks of the partition net to the
    fastening rings of the boot ››› Fig. 168 B and
    tighten the straps firmly.
    Removing the net partition
    ● If required, remove the rear shelf
    ››› page 159.
    ● Loosen the straps from the net partition.
    ● Release the net hooks from the fastening
    rings ››› Fig. 168 B .
    ● Unhook the net partition on the right-hand
    side roof support ››› Fig. 168 A by pressing
    on the rod.
    ● Unhook the net partition from the left-hand
    side roof housing.
    ● Fold in the net partition ››› page 167.
    ● If required, fit the rear shelf ››› page 159.
     
  2. HortonSEAT

    HortonSEAT Adam Parts Man
    Forum Sponsor

    Joined:
    Jan 12, 2016
    Messages:
    145
    Likes Received:
    11
    Hello

    This item you mention has not been communicated or listed within the UK market or accessories brochure. I will contact SEAT next week to see if I can get any more information for you

    Thanks

    Adam
     
  3. Tony Tonic

    Tony Tonic Active Member

    Joined:
    Jan 30, 2019
    Messages:
    160
    Likes Received:
    23
  4. Tony Tonic

    Tony Tonic Active Member

    Joined:
    Jan 30, 2019
    Messages:
    160
    Likes Received:
    23
    @HortonSEAT did you have any further info from SEAT?
     

Share This Page