Throttle settings

[Maypack]

@markrtw Thread moved to here.

Let me know how your back to back test goes.

@theoldboy. I’ll do some testing on Throttle changes and put some results up here.

 

[Deleted member 103408]

thanks and i have updated the obd11 thread with link to here as well

 

[Maypack]

Completed some testing on the Throttle Mods available via OBDeleven on a facelift Cupra 300, 67 plate non ACC.

Starting with a stock car, no mods a full system scan was completed which showed no errors/faults identified.

Attempted the Audi Throttle Mod as shown below

Select Control unit 01- Engine
Select Long Coding (1)
Select Byte 0,
Change Bit 0-2 from Seat to AUDI (02)

Completed another scan post mods and got the following errors/faults ( as well as an Amber Cruise Control Indicator with an Apostrophie when the Cruise Control Switch was moved to On.)

01 - Engine: U112300 Databus Error Valve Received.
02 - Transmission: P173400 Starter Release From The Selector Lever Sensor System.
03 - Brakes: Checking Coding/Versions of Control Modules in Drivetrain.

All faults were reset and the Audi Throttle Mod reversed.

Another scan was performed and this indicated no errors/faults.

@theoldboy are you able to decipher what is happening?