THS Decat Downpipe

[pete_266]

Hi Guys,

I got a THS Performance downpipe off a friend for cheap but as they only sell the downpipe i was wandering if a cat back milltek or blue flame exhaust would bolt straight on.

I've got a 06 FR TDI.

Thanks.

 

[bbewekim]

I was looking at one of these, Is it 2.5inch bore? If so the milltek catback should go straight on with an attatchment to connect them both.

*if anyone has a decat downpipe and cat to backbox pipe 2.5inch bore for milltek or THS forsale let me know

 

[pete_266]

Hi it is the 2.5". but is not the milltek 2.5" as well?

So a sleeve should be ok to connect them?

 

[bbewekim]

Hi it is the 2.5". but is not the milltek 2.5" as well?

So a sleeve should be ok to connect them?

Exactly, it should be direct fit. Especially as this downpipe should sit where the standard system would. Hopefully one should slot over the other if not as you said a sleeve.

 

[soupz]

Anyone used THS Downpipe Decat?

Hey just wondering has anyone used the THS Downpipe Decat for tdi? Good enough job? Make much difference power or noise wise? Found this place selling them, seems decent enough bit of kit & fair price.
http://fr-rtuning-shop.co.uk/index.php?_a=viewProd&productId=1899

 

[navnayyar]

good piece of kit mate. It can be used with oem rear cat-back or a aftermarket one. Its well polished too