hi all, happy holidays and such!
since i'm in holiday leave, decided to do some work on the car.
thought to myself what's next on the list after the plastic cover.
so went to the car, unbolted the 'S' badge fron the boot lid,
and set about to paint.
first needed to remove the chrome coating, fairly easy job, took 10 mins.
then sended it down, using water paper, started 180 grit all the way up to 2500 grit.
washed it, let it dry then primer.
two layers of primer, 15 mins between coats, ended up with this:
then i set about giving it two layers of paint, decided i'm gonna use matt black for this job.
again 3 layer of coating, 15 mins between each one.
end result as you see below:
sorry for the bad pics quality, took them at night.
let it dry over night, then decided something missing.
so did the same thing to the 'S' housing,
sand it down, primed then decided i wanna break the black,
3 layer of FIRE RED with 2 layer of lacquer 20 mins between each coat.
But still something didn't work for me.
So took the old masking tape and masked the 's':
First layer of red:
so now just letting it dry for about 2 hours, and after that, pics from installing it on car
thanks for reading!!
since i'm in holiday leave, decided to do some work on the car.
thought to myself what's next on the list after the plastic cover.
so went to the car, unbolted the 'S' badge fron the boot lid,
and set about to paint.
first needed to remove the chrome coating, fairly easy job, took 10 mins.
then sended it down, using water paper, started 180 grit all the way up to 2500 grit.
washed it, let it dry then primer.
two layers of primer, 15 mins between coats, ended up with this:
then i set about giving it two layers of paint, decided i'm gonna use matt black for this job.
again 3 layer of coating, 15 mins between each one.
end result as you see below:
sorry for the bad pics quality, took them at night.
let it dry over night, then decided something missing.
so did the same thing to the 'S' housing,
sand it down, primed then decided i wanna break the black,
3 layer of FIRE RED with 2 layer of lacquer 20 mins between each coat.
But still something didn't work for me.
So took the old masking tape and masked the 's':
First layer of red:
so now just letting it dry for about 2 hours, and after that, pics from installing it on car
thanks for reading!!