Urgent help required !!!

venjahCupraTDI

Active Member
Jan 30, 2018
1
0
Evening all.


I have a plume of white/grey*diesel smoke on first startup and its lumpy for a few seconds. Now its not blue, its not white for water and its not black, it stinks of diesel and when i say plume i mean imagine a steam engine (maybe not so bad but you get the idea), for about 2/3minutes when starting.


This has been getting worse and worse over the past 3 months:*


So far i have done (here goes):


-Head off.

-New fuel filter

-New airfilter

-New glowplugs

-Turbo seals and shaft checked (No wear)

-Cam & buckets checked. (No wear)

-New darkside valve stem seals.

-Valves & guides were checked. (No wear)

-Injector #2 replaced as EML shown fault and had awful surging on boost (new injector fixed problem)

-New injector seals fitted using vag tool.

-New head gasket

-New manifold gasket

-New inlet gasket

-New rocker gasket

-New engine temp sensor

-New steel braided Turbo oil feed

-New headbolts, inj bolts etc

-Elephant mod

-New 505.01 PD oil

-Bores & Rings checked (No wear)


Even after doing all of this the car is still smoking on start up and is*lumpy for a few seconds.


Few deets on the car:

Engine: PD160 BPX

Mileage: 142'***


I have the lite version of vagcom BUT although i know my way around a set of spanners i really have no idea how*or what to do with it.*


Id really really appreciate any help or advice on this, im at my witts end !!*


Many thanks in advance!!!


Apologies if this is in the wrong section? Please move/advise.



I DO HAVE A VIDEO OF THE SMOKE THAT I CAN UPLOAD TO YOUTUBE.
 
SEATCUPRA.NET Forum merchandise