Any ideas on what it could be, fixes? Sent from my CUBOT MAX using Tapatalk
supersticky Active Member Dec 16, 2010 1,014 46 taunton somerset Sep 18, 2018 #1 Any ideas on what it could be, fixes? Sent from my CUBOT MAX using Tapatalk Last edited: Sep 18, 2018
Legojon I only wanted a remap Staff member Moderator Jul 7, 2015 5,284 2,713 Sep 18, 2018 #2 http://wiki.ross-tech.com/wiki/index.php/01222 I guess the ecu has lost communication with the sensor that reports a side impact. https://workshop-manuals.com/seat/l...ssenger_protection/crash_sensors_for_airbags/
http://wiki.ross-tech.com/wiki/index.php/01222 I guess the ecu has lost communication with the sensor that reports a side impact. https://workshop-manuals.com/seat/l...ssenger_protection/crash_sensors_for_airbags/
Zardoz Active Member Sep 6, 2016 525 214 North West Sep 18, 2018 #3 This any help mate? https://workshop-manuals.com/seat/l...ssenger_protection/crash_sensors_for_airbags/
This any help mate? https://workshop-manuals.com/seat/l...ssenger_protection/crash_sensors_for_airbags/
masterfrodo Active Member Jul 29, 2016 267 8 Sep 18, 2018 #4 I have the same error. I was told it was the wiring connector under the seat that is the likely culprit, not the sensor in the door!
I have the same error. I was told it was the wiring connector under the seat that is the likely culprit, not the sensor in the door!
supersticky Active Member Dec 16, 2010 1,014 46 taunton somerset Sep 18, 2018 #5 Cheers guy's was the wire wet damaged or disconnected? Sent from my CUBOT MAX using Tapatalk
masterfrodo Active Member Jul 29, 2016 267 8 Sep 18, 2018 #6 think mines wet damaged from when the carpet got wet